GMC 25097699 Valve, Crankcase Depression Regulator

You can Select Your Vehicle to check if 25097699 fits your vehicle.

The rocker arm cover is home to the PCV valve. Start the engine and allow it to idle until normal operating temperature is reached. While leaving the hose attached, draw the valve out of the rubber grommet in the cover. Then, put your finger over the valve opening. If there's no suction, an obstructed hose, manifold port or problem with a valve could be a reason behind that. In case such hoses get blocked or deteriorated, they should be replaced. Also, turn off the engine and shake the PCV valve. If it doesn't rattle, then it is time to replace it. To do this, remove the valve remembering how it was positioned from the end of the hose. When purchasing a new PCV valve ensure you have picked up right one for your vehicle and engine size by comparing it with old one. Once you have that new valve, push it into the end of hose all way in so that it seats well. Look at rubber grommet for any damage and replace if necessary. Finally return back your PCV valve and its hose to their original place.

The pressure differential is achieved by connecting a fresh air inlet hose from the air intake duct or resonator box to the valve cover, allowing fresh air to equalize the pressure. Another hose connects the left valve cover to the intake manifold, drawing in crankcase vapors.

The PCV valve is typically found in the rocker arm cover.