×
Contact Us Live Chat or 1-888-737-9766
My Garage
My Account
Cart
Search Bar
Search by Part Number, Part Name, or Vehicle
Track Order Help Center
Make sure this part fits

GMC 25798133 Rear Axle

2009 GMC Yukon

Customer Questions & Expert Answers (19)
GM 25798133 Rear Axle
GM 25798133 Rear Axle
  • Part Description
    Axle, Rear Axle
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Product Specifications

    BrandGenuine GMC
    Manufacturer Part Number25798133
    Part DescriptionAxle, Rear Axle
    Item Dimensions73.5 x 20.3 x 15.2 inches
    Item Weight109.10 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25798133
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009 GMC Yukon8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.2L1/2 TON, YUKON/DENALI/ESCALADE

  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 25798133 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What does the differential in the rear axle assembly allow of the 2013 Chevrolet Suburban? Posted by Customer
    A:
    The differential allows the outer rear wheel to turn at a higher speed than the inner tire when going around a corner.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove and install components in the front differential for AWD systems for the 2011 Chevrolet Tahoe? Posted by Customer
    A:
    To remove and install components in the front differential for AWD systems, follow these steps: Remove the stabilizer bar link and, if applicable, the front shock absorber. Unbolt the right driveaxle from the axleshaft flange, supporting it properly. Support the differential carrier with a floor jack and a block of wood. Remove nuts attaching the axle shaft to its support bracket and the bolts securing the axle shaft flange to the differential carrier. Use a brass punch and hammer to separate the axle shaft from the differential case side gear. Remove the inner axle shaft assembly and axle shaft. Replace the inner seal and bearing with a special tool, then apply RTV sealant to the differential sealing surface and install the inner axle shaft housing assembly. Install the axle shaft to the support bracket and align the splines with the differential side gear. Tap the axle shaft with a mallet until the ring (clip) aligns with the groove in the differential case side gear. Install the axle shaft to the inner flange and tighten the bolts. Reinstall the stabilizer link, fill the differential with lubricant, install the differential carrier splash shield, and finally, install the wheel and lug nuts. Lower the vehicle, tighten the lug nuts, and check for proper operation.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the drive axle-to-axle shaft flange bolts be removed of the 2010 Chevrolet Suburban? Posted by Customer
    A:
    The drive axle-to-axle shaft flange bolts should be removed while having an assistant apply the brake to prevent the driveaxle from turning.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after raising on jackstands for the 2007 Chevrolet Tahoe? Posted by Customer
    A:
    The next step is to drain the differential lubricant and remove the differential cover.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the outer ends of the driveaxles connected to the front hub and bearing assembly for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    The outer ends of the driveaxles have a stub shaft that is splined to the front hub and bearing assembly and locked in place with a large nut.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How can wear in the CV joints and driveaxle shafts be checked of the 2009 Chevrolet Suburban? Posted by Customer
    A:
    To check for wear in the CV joints and driveaxle shafts, grasp each axle and rotate it in both directions while holding the CV joint housings, feeling for play indicating worn splines or sloppy CV joints.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after raising the 2007 Chevrolet Suburban on jackstands? Posted by Customer
    A:
    The next step is to drain the differential lubricant and remove the differential cover.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of front axle assembly is used in the 2007 Chevrolet Tahoe? Posted by Customer
    A:
    4WD models use a fully independent front axle assembly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove and install components in the front differential for AWD systems of the 2012 Chevrolet Suburban? Posted by Customer
    A:
    To remove and install components in the front differential for AWD systems, follow these steps:Remove the stabilizer bar link and, if applicable, the front shock absorber.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after raising the 2008 Chevrolet Suburban and supporting it on jackstands? Posted by Customer
    A:
    After raising the vehicle and supporting it on jackstands, a jack should be positioned under the rear axle differential housing.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the driveaxle/hub nut and flange bolts be tightened during installation for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    The driveaxle/hub nut (new) and the flange bolts should be tightened to the torque values specifications during installation.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the rear axle assembly be installed for the 2007 Chevrolet Tahoe? Posted by Customer
    A:
    To install the rear axle assembly, the reverse order of removal should be followed. All suspension and brake fasteners should be tightened to the torque value specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done if the 2007 GMC Yukon has a differential carrier splash shield? Posted by Customer
    A:
    If the vehicle has a differential carrier splash shield, it should be removed after removing the driveaxle/hub nut.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the rear axle assembly be installed for the 2008 GMC Yukon? Posted by Customer
    A:
    To install the rear axle assembly, the reverse order of removal should be followed. All suspension and brake fasteners should be tightened to the torque value specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of CV joints are equipped on the outer ends of the driveaxles for the 2011 GMC Yukon? Posted by Customer
    A:
    The outer ends of the driveaxles are equipped with ball-and-cage type CV joints capable of angular but not axial movement.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done for 2013 GMC Yukon? Posted by Customer
    A:
    For models with a locking differential, you should rotate the differential until the shaft touches the case for access to the C-locks.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove and install components in the front differential for AWD systems for the 2010 GMC Yukon? Posted by Customer
    A:
    To remove and install components in the front differential for AWD systems, follow these steps: Remove the stabilizer bar link and, if applicable, the front shock absorber. Unbolt the right driveaxle from the axleshaft flange, supporting it properly. Support the differential carrier with a floor jack and a block of wood. Remove nuts attaching the axle shaft to its support bracket and the bolts securing the axle shaft flange to the differential carrier. Use a brass punch and hammer to separate the axle shaft from the differential case side gear. Remove the inner axle shaft assembly and axle shaft. Replace the inner seal and bearing with a special tool, then apply RTV sealant to the differential sealing surface and install the inner axle shaft housing assembly. Install the axle shaft to the support bracket and align the splines with the differential side gear. Tap the axle shaft with a mallet until the ring (clip) aligns with the groove in the differential case side gear. Install the axle shaft to the inner flange and tighten the bolts. Reinstall the stabilizer link, fill the differential with lubricant, install the differential carrier splash shield, and finally, install the wheel and lug nuts. Lower the vehicle, tighten the lug nuts, and check for proper operation.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of rear axle assembly does the 2009 GMC Yukon have? Posted by Customer
    A:
    The vehicle has a hypoid, semi-floating type rear axle assembly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 25798133, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 25798133 Rear Axle. It is sometimes referred to as GMC Axle Shaft. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific GMC Yukon models.

Affordable, reliable and built to last, GM part # 25798133 Rear Axle stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly