Make sure this part fits

GMC 20849986 Front Axle Assembly (3.42 Ratio)

2008-2012 GMC Canyon

Customer Questions & Expert Answers (11)
GM 20849986 Front Axle Assembly (3.42 Ratio)
  • Part Description
    Axle Assembly, Front (3.42 Ratio) ; Axle, Front Axle And Axle Center
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GMC
    Manufacturer Part Number20849986
    Part DescriptionAxle Assembly, Front (3.42 Ratio) ; Axle, Front Axle And Axle Center
    Other NamesDifferential Assembly
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU20849986
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008-2012 GMC Canyon4 Cyl 2.9L, 5 Cyl 3.7L, 8 Cyl 5.3LPICKUP, PICKUP CREW CAB, PICKUP EXTENDED CAB, PICKUP EXTENDED LENGTH
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 20849986 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How can you free a stuck stub shaft from the hub splines if tapping it with a hammer doesn't work for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    If tapping the stub shaft with a hammer doesn't free it from the hub splines, you can push the driveaxle from the hub with a puller.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What action should be taken if either boot of a driveaxle is damaged for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    If either boot of a driveaxle is damaged, that driveaxle must be removed in order to replace the boot.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after removing the wheel and brake drum for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Remove the differential cover and allow the lubricant to drain into a container.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What does the front axle assembly consist of for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    The front axle assembly comprises a differential and two driveaxles with inner and outer constant velocity (CV) joints.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What component should be disconnected from the rear axle pinion flange during rear axle removal for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    The driveshaft should be disconnected from the rear axle pinion flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What components should be disconnected from the rear axle assembly before removing it from under the 2008 GMC Canyon? Posted by Customer
    A:
    Before removing the rear axle assembly from under the vehicle, you should disconnect the shock absorbers at their lower mounts, disconnect the vent hose from the fitting on the axle housing, and disconnect the flexible brake hose from the junction block on the axle housing (and plug the hose to prevent fluid leakage).
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you be careful of when removing the axleshaft for the 2011 GMC Canyon? Posted by Customer
    A:
    Take care not to damage the oil seal and ensure that the thrust washer in the differential doesn't fall out.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What factors should be considered before assuming axle issues for the 2009 GMC Canyon? Posted by Customer
    A:
    Factors like road noise, tire conditions, and engine or transmission noise should be thoroughly checked as they may mimic axle problems.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of CV joints are used in the outer ends of the driveaxles, and what type of motion are they capable of for the 2006 GMC Canyon? Posted by Customer
    A:
    The outer ends of the driveaxles are equipped with ball-and-cage type CV joints, which are capable of angular but not axial movement.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How can you prevent the hub from rotating when working on it for the 2004 GMC Canyon? Posted by Customer
    A:
    To prevent the hub from rotating, you can brace a large prybar across two of the wheel studs or insert a long punch or screwdriver through the window in the brake caliper and into the disc cooling vanes.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 20849986, the Right Choice

To ensure reliability, purchase GM part # 20849986 Front Axle Assembly (3.42 Ratio). It is sometimes referred to as GMC Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific GMC Canyon models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 20849986 Front Axle Assembly (3.42 Ratio). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly