Make sure this part fits

GMC 15003924 Front Lower Control Arm Assembly

1995-2003 GMC

Customer Questions & Expert Answers (9)
GM 15003924 Front Lower Control Arm Assembly
  • Part Description
    Arm Assembly, Front Lower Control ; Arm, Steering Knuckle Upper & Lower Control
  • Position
    Front Lower
  • Replaces
    12470310, 12383464
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GMC
    Manufacturer Part Number15003924
    Part DescriptionArm Assembly, Front Lower Control ; Arm, Steering Knuckle Upper & Lower Control
    Other NamesLower Control Arm
    Item Dimensions20.6 x 17.9 x 7.5 inches
    Item Weight15.50 Pounds
    PositionFront Lower
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces12470310, 12383464
    ManufacturerGeneral Motors
    SKU15003924
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1995-2001 GMC Jimmy6 Cyl 4.3L2 DOOR, 4 DOOR
    1996-2003 GMC Sonoma4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3LPICKUP
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 15003924 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the control arm on the 2003 Chevrolet Blazer? Posted by Customer
    A:
    To remove the control arm on a 2WD model, start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheel and then the coil spring. Disconnect the lower balljoint and take the control arm to a dealer or properly equipped shop for any necessary replacements of the balljoint and bushings.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after installing the upper control arm for the 2000 Chevrolet Blazer? Posted by Customer
    A:
    Attach the balljoint to the steering knuckle and connect the brake hose bracket. Install the wheel and lower the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    Is there another method of removing the control arm for the 1997 GMC Jimmy? Posted by Customer
    A:
    Yes, there is another method of removal. Begin by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheel and front splash shield if applicable. Disconnect the shock absorber and stabilizer bar from the lower control arm. Remove the torsion bar and then the lower control arm by detaching the lower balljoint from the steering knuckle. Check the bushings for damage or wear, replacing the control arm if necessary.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you install the control arm using the alternative method for the 1994 Chevrolet S10? Posted by Customer
    A:
    To install the control arm using the alternative method, raise it into position and install the control arm pivot bolts, washers, and nuts without fully tightening them. Carefully raise the lower control arm with a floor jack until the balljoint stud can be inserted into the hole in the steering knuckle. Install the balljoint stud nut, tighten it to the proper torque, and install a new cotter pin. Install the torsion bar, connect the stabilizer bar, and install the shock absorber. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the torque specifications. Tighten the lower control arm pivot bolts to the correct torque specifications and install the splash shield if applicable. Measure the vehicle's ride height on each side and adjust the torsion bar accordingly until the vehicle sits level.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    Are there any components that need to be removed before disconnecting the upper control arm for the 1997 GMC Jimmy? Posted by Customer
    A:
    Yes, if necessary, remove the air cleaner extension. Also, disconnect the brake hose bracket and ABS wheel speed sensor from the upper control arm.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should you do to relieve spring pressure on the upper control arm for the 1995 Chevrolet S10? Posted by Customer
    A:
    Position a floor jack with a wood block under the lower control arm.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    Is there anything else that needs to be done after tightening the nuts of the 1996 GMC Sonoma? Posted by Customer
    A:
    Finally, install the air cleaner extension if it was removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    Is there another method of removing the control arm of the 2003 GMC Sonoma? Posted by Customer
    A:
    Yes, there is another method of removal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 15003924, the Right Choice

To ensure reliability, purchase GM part # 15003924 Front Lower Control Arm Assembly. It is sometimes referred to as GMC Control Arm. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific GMC Jimmy, Sonoma models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 15003924 Front Lower Control Arm Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly