Make sure this part fits

GMC 25871234 Rear Shock Absorber Assembly

2007-2010 GMC

Customer Questions & Expert Answers (19)
GM 25871234 Rear Shock Absorber Assembly
  • Part Description
    Absorber Assembly, Rear Shock ; Absorber, Front And Rear Suspension
  • Position
    Rear
  • Replaces
    15935565
  • Manufacturer
    General Motors
Make sure this part fits
$72.00 MSRP: $142.88
You Save: $70.88 (50%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GMC
    Manufacturer Part Number25871234
    Part DescriptionAbsorber Assembly, Rear Shock ; Absorber, Front And Rear Suspension
    Item Dimensions27.0 x 4.4 x 3.4 inches
    Item Weight5.60 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15935565
    Require Quantity2
    ManufacturerGeneral Motors
    SKU25871234
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2010 GMC Sierra6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 4.8L Flex, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L FlexCREW CAB 1/2 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON
    2007-2010 GMC Yukon8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex1/2 TON, YUKON/DENALI/ESCALADE
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 25871234 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    Why are driveaxle boots important, and what should you inspect them for for the 2012 Chevrolet Avalanche? Posted by Customer
    A:
    Driveaxle boots are important because they prevent dirt, water, and foreign material from entering and damaging the constant velocity (CV) joints. Inspect the boots for tears, cracks, as well as loose clamps.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the 2012 Chevrolet Suburban? Posted by Customer
    A:
    Follow the same steps as removing the coil-over shock absorber model, but use a backup wrench on the stem to remove the upper mounting nut and related hardware. Remove the lower mounting nut and bolt, noting the direction in which the bolt points.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after supporting the rear axle for the 2008 Chevrolet Avalanche? Posted by Customer
    A:
    After supporting the rear axle, the shock absorber upper and lower mounting fasteners should be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done if the 2012 GMC Sierra is equipped with a ride control system? Posted by Customer
    A:
    If the vehicle is equipped with a ride control system, the electrical connector and the airline should be disconnected from the shock absorber.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the torsion bar2012 Chevrolet Silverado? Posted by Customer
    A:
    To install, reverse the removal steps and ensure the lower mounting bolt is pointing in the same direction as before.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What specific areas should be examined when inspecting the control arms for the 2011 Chevrolet Tahoe? Posted by Customer
    A:
    Examine the bushings where the control arms meet the chassis for damage and wear.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step to remove the shock absorber from a 2009 Chevrolet Silverado? Posted by Customer
    A:
    The first step is to raise the rear of the vehicle and support it securely on jackstands placed underneath the frame rails.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the 2010 Chevrolet Suburban? Posted by Customer
    A:
    To install, reverse the removal steps and tighten the mounting fasteners to the torque specifications. If equipped with a suspension control system, reconnect the electrical connector to the top of the shock absorber.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done if fluid leakage is observed for the 2007 Chevrolet Silverado? Posted by Customer
    A:
    If leakage is noted, it's advisable to replace the shocks as a set.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the 2009 Chevrolet Suburban? Posted by Customer
    A:
    To install, reverse the removal steps and ensure the lower mounting bolt is pointing in the same direction as before.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What might be the issue if the 2009 Chevrolet Suburban continues to move up and down or fails to return to its original position? Posted by Customer
    A:
    If the vehicle continues to move up and down or fails to return to its original position, it may indicate a worn or weak shock absorber.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after supporting the rear axle for the 2008 Chevrolet Suburban? Posted by Customer
    A:
    After supporting the rear axle, the shock absorber upper and lower mounting fasteners should be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the rear axle be supported during the removal process for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    The rear axle should be supported with a floor jack placed under the axle tube closest to the shock absorber being removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    Besides leakage, what should you inspect on the shocks for the 2011 GMC Sierra? Posted by Customer
    A:
    Inspect the shocks to ensure they are securely mounted and undamaged. Check the upper mounts for damage and wear.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step to remove the shock absorber from the 2008 GMC Yukon? Posted by Customer
    A:
    The first step is to raise the rear of the vehicle and support it securely on jackstands placed underneath the frame rails.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the 2013 GMC Sierra? Posted by Customer
    A:
    Follow the same steps as removing the coil-over shock absorber model, but use a backup wrench on the stem to remove the upper mounting nut and related hardware. Remove the lower mounting nut and bolt, noting the direction in which the bolt points.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the 2010 GMC Yukon? Posted by Customer
    A:
    To install, reverse the removal steps and tighten the mounting fasteners to the torque specifications. If equipped with a suspension control system, reconnect the electrical connector to the top of the shock absorber.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    Why are driveaxle boots important, and what should you inspect them for for the 2012 GMC Yukon? Posted by Customer
    A:
    Driveaxle boots are important because they prevent dirt, water, and foreign material from entering and damaging the constant velocity (CV) joints. Inspect the boots for tears, cracks, as well as loose clamps.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 25871234, the Right Choice

To ensure reliability, purchase GM part # 25871234 Rear Shock Absorber Assembly. It is sometimes referred to as GMC Shock Absorber. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific GMC Sierra, Yukon models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 25871234 Rear Shock Absorber Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly