GM 25731662 Rear Spring

You can Select Your Vehicle to check if 25731662 fits your vehicle.

Removing a coil spring can be a hazardous task, so it is crucial to exercise extreme caution and adhere closely to the provided instructions to avoid any serious injuries. It is essential to utilize a reliable and top-notch spring compressor and meticulously follow the guidelines provided by the manufacturer for the tool's proper usage.

After installing the strut, have the front-end alignment checked and adjusted if necessary.

For the 2000 and later Deville/DTS models and all Seville models, the removal process is slightly different. Loosen the rear wheel lug nuts, raise the rear of the vehicle, and support it securely on jackstands. Block the front wheels and remove the rear wheel. Detach the stabilizer bar link from the control arm and support the lower control arm with a floor jack placed under the end of the control arm. Detach the shock absorber from the control arm and the toe link from the control arm. Slowly lower the floor jack until the control arm comes to rest against the suspension support, and then remove the coil spring.

With the flats facing the steering knuckle flange.