GM 25693382 Front Spring

You can Select Your Vehicle to check if 25693382 fits your vehicle.

The bearing cap, upper spring seat, and upper insulator.

For the 2000 and later Deville/DTS models and all Seville models, the removal process is slightly different. Loosen the rear wheel lug nuts, raise the rear of the vehicle, and support it securely on jackstands. Block the front wheels and remove the rear wheel. Detach the stabilizer bar link from the control arm and support the lower control arm with a floor jack placed under the end of the control arm. Detach the shock absorber from the control arm and the toe link from the control arm. Slowly lower the floor jack until the control arm comes to rest against the suspension support, and then remove the coil spring.

Before starting to remove the strut, apply the parking brake and block the rear wheels. Loosen the wheel lug nuts and raise the front of the vehicle, supporting it securely on jackstands.

Mount it in a vise, cushioning the vise jaws with rags or blocks of wood.

It is essential to utilize a reliable and top-notch spring compressor when removing a coil spring.

It is crucial to exercise extreme caution when removing a coil spring to avoid any serious injuries.

To start removing the 1999 Deville model, first, loosen the rear wheel lug nuts and block the front wheels. Then, raise the rear of the vehicle and support it securely on jackstands placed under the frame. Remove the rear wheels.

Remove the wheel and mark the relationship of the strut to the steering knuckle.