GM 10338537 Speaker Assembly, Radio Front Side Door

You can Select Your Vehicle to check if 10338537 fits your vehicle.

To disconnect the radio, you will need to pull the center trim panel, and then to unscrew radio mount screws and pull the radio out of the instrument panel. Remove the radio from the dash, unscrew the electrical and connectors and the antenna cable from the back part by using the release tabs, changing positions on the antenna lead before pulling out the connector. For installation you have to do the vice-versa. Door speakers should require the front door trim panel to be unscrewed followed by the removal of the speaker mounting screw. Remove the speaker and disconnect the locator pin associated with the harness clip as well as the electrical connector; the flange should be aligned when reinstalled. For front upper speakers in Impala models, first, you got to take away the instrument panel end cover and the A - pillar trim, the locking tabs must be released and the electrical lead from the connector that you can access through the hole in the end cover has to be disconnected. For rear speakers: first, take out the rear shelf trim panel; second, find the position of the speaker in the trunk; third, disconnect the electrical connector; fourth, press the two mounting tabs and thus the flange will be released and then the speaker can be removed. Unlike installation, reinstallation of all the components is done in a descending order.