Make sure this part fits

GM 15993849 Shaft, Front Stabilizer (33Mm Bar Diameter)

1995-2000 GM

Customer Questions & Expert Answers (9)
GM 15993849 Shaft, Front Stabilizer (33Mm Bar Diameter)
  • Part Description
    SHAFT, Stabilizer
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15993849
    Part DescriptionSHAFT, Stabilizer
    Other NamesStabilizer Bar
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15993849
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1996-2000 Chevrolet Blazer6 Cyl 4.3L2 DOOR, 4 DOOR
    1995-2000 Chevrolet S104 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3LPICKUP
    1996-2000 GMC Jimmy6 Cyl 4.3L2 DOOR, 4 DOOR
    1995-2000 GMC Sonoma4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3LPICKUP
    1996-2000 Oldsmobile Bravada6 Cyl 4.3LBRAVADA
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 15993849 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the rear stabilizer bar? Posted by Customer
    A:
    To uninstall the sway bar kit, you must first raise the rear of the vehicle and securely support it by using jack stands. Set up blocks on the front wheels to stop the car from rolling off its stands. Afterwards, remove the lower nuts, washers and bolts from sway bar kit-to-frame bracket links. Then remove U-bolt nuts and pull off the sway bar kit clamps. Finally, take out whole sway bar kit assembly. Also check for cracks, tears or deterioration in all sways bar kit and link bushings after removal to replace them if necessary. In short, undoing these steps should be followed with tightening of all fasteners up to torque specifications while installing a new sway bar kit.
    Posted by GMPartsGiant Specialist
    Q:
    What should you do after raising the 1998 Chevrolet Blazer and supporting it securely on jackstands? Posted by Customer
    A:
    After raising the vehicle and supporting it securely on jackstands, you should remove the nuts from the link bolts and take out the link bolts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the next step after removing the lower nuts, washers, and bolts for the 2002 Chevrolet Blazer? Posted by Customer
    A:
    Remove the nuts from the U-bolts and take off the stabilizer bar clamps.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you remove the stabilizer bar for the 1997 GMC Jimmy? Posted by Customer
    A:
    To remove the stabilizer bar, start by raising the vehicle and supporting it securely on jackstands.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you remove the stabilizer bar for the 1994 Chevrolet S10? Posted by Customer
    A:
    To remove the stabilizer bar, start by raising the vehicle and supporting it securely on jackstands.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you install the stabilizer bar for the 1995 Chevrolet S10? Posted by Customer
    A:
    Simply reverse the removal steps and make sure to tighten all fasteners to the proper torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you install the stabilizer bar of the 1997 GMC Sonoma? Posted by Customer
    A:
    Simply reverse the removal steps and make sure to tighten all fasteners to the proper torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you remove the stabilizer bar of the 1995 GMC Sonoma? Posted by Customer
    A:
    To remove the stabilizer bar, start by raising the vehicle and supporting it securely on jackstands.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 15993849, the Right Choice

To ensure reliability, purchase GM part # 15993849 Shaft, Front Stabilizer (33Mm Bar Diameter). It is sometimes referred to as GM Sway Bar Kit. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Blazer, S10 models. It fits GMC Jimmy, Sonoma. It also fits Oldsmobile Bravada.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 15993849 Shaft, Front Stabilizer (33Mm Bar Diameter). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly