GM 42750576 Shaft Assembly, Front Stab

You can Select Your Vehicle to check if 42750576 fits your vehicle.

To remove the bushings and links, start by loosening the front wheel lug nuts and raising the front of the vehicle. Support it securely on jackstands and remove the front wheels. Then, remove and discard the nuts that attach the upper and lower ends of the sway bar links to the strut/coil spring assembly and to the sway bar. Detach the links. Lower and support the subframe enough to access the sway bar mounting brackets. Remove the bolts and nuts from the sway bar bushing brackets. Inspect the retainer bushings for cracks and tears. If any bushing is damaged, replace the sway bar and bushings as a set. Also, if the ballstuds on the links are loose or worn, replace the links. To install, guide the sway bar kit into place and install the bushing bracket bolts, tightening them to the specified torque. Then, install the links and tighten the link nuts to the proper torque. To remove the sway bar kit, detach the links from the bar and remove the sway bar bushing bracket bolts. Twist the sway bar kit up and remove it through the right wheel opening. The installation process is the reverse of the removal procedure.