GM 20932140 Shaft Assembly, Front Stabilizer

You can Select Your Vehicle to check if 20932140 fits your vehicle.

For 2009 and earlier models, the removal process of the front sway bar kit involves loosening the wheel lug nuts, raising the vehicle, supporting it on jackstands, and removing the wheels. The intermediate shaft pinch bolt from the steering shaft is removed, followed by the stabilizer bar link nut and brackets. The rear part of the subframe is supported with a floor jack, and the two rear subframe mounting bolts are removed. The subframe is slowly lowered to detach the sway bar kit, making sure to separate the steering gear input shaft and shaft coupler without binding and detaching any wiring harnesses or hoses that may come under tension. The kit is carefully removed from the left side of the vehicle.

To install, lubricate the bushings with vegetable oil and tighten the link and bracket fasteners to the specified torque. Install the wheels, lower the vehicle, and tighten the lug nuts to the torque specifications.