GM 15159598 Shaft,Rear Stabilizer

You can Select Your Vehicle to check if 15159598 fits your vehicle.

To remove the sway bar kit, start by loosening the rear wheel lug nuts and raising the rear of the vehicle. Support it securely on jackstands and block the front wheels to prevent rolling. Remove the rear wheels. Then, remove the sway bar kit link-to-frame nuts/bolts and the nuts from the lower ends of the links. Separate the links from the bar. Finally, remove the sway bar kit by removing the clamp nuts. To install the sway bar kit, inspect the sway bar bushings and link bushings for any signs of deterioration and replace them if necessary. Then, follow the reverse order of removal, making sure to tighten all fasteners to the specified torque.

The next step is to remove the stabilizer bar clamp bolts.

To remove the stabilizer bar, you should remove the clamp nuts.

Before installing the stabilizer bar, you should inspect all parts for wear and damage.