Make sure this part fits

GM 15947543 Fuel Tank Meter/Pump SENSOR KIT

2007-2010 GM

Customer Questions & Expert Answers (5)
GM 15947543 Fuel Tank Meter/Pump SENSOR KIT
  • Part Description
    Sensor Kit, Fuel Level ; Sensor Kit, Fuel Tank Meter/Pump
  • Manufacturer
    General Motors
Make sure this part fits
$147.59 MSRP: $310.08
You Save: $162.49 (53%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15947543
    Part DescriptionSensor Kit, Fuel Level ; Sensor Kit, Fuel Tank Meter/Pump
    Other NamesCover, Fuel Gauge Sending Unit, Level Sensor
    Item Dimensions8.3 x 6.8 x 3.5 inches
    Item Weight0.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15947543
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2010 Chevrolet Cobalt4 Cyl 2.2L2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 4 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR
    2007-2010 Pontiac G54 Cyl 2.2L2 DOOR, 4 DOOR, GT 2 DOOR, GT 4 DOOR, LS 2 DOOR, LS 4 DOOR, SE 2 DOOR, SE 4 DOOR, SPORT 2 DOOR, SPORT 4 DOOR
    2007 Saturn Ion4 Cyl 2.2L2 DOOR, 4 DOOR, REDLINE 2 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 15947543 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you disassemble the fuel pump/fuel level sensor module for Chevrolet Cobalt,HHR and Saturn ION? Posted by Customer
    A:
    To disassemble the fuel pump/fuel level sensor module, begin by removing it and placing it on a clean workbench surface. Disconnect the fuel level sensor connector at the top of the module and unplug the connector housing from the bottom of the fuel pump cover by disengaging the locking tab with a screwdriver.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the fuel pump/fuel level sending unit module for Chevrolet Cobalt,HHR and Saturn ION? Posted by Customer
    A:
    To remove the fuel pump/Fuel Level Sensor, start by disconnecting the cable from the negative battery terminal. Then, relieve the system fuel pressure and equalize tank pressure by removing the fuel filler cap. Next, remove the fuel tank and disconnect the fuel supply and return lines from the fuel pump/Fuel Level Sensor module, being careful to soak up any spilled fuel. Mark the orientation of the fuel pump in relation to the fuel tank for proper realignment during installation. Use water pump pliers to unscrew the locknut counterclockwise, or use a hammer and brass punch if it's tight. Remove the fuel pump/Fuel Level Sensor, taking care not to damage the fuel inlet strainer or the Fuel Level Sensor float arm and float. For installation, inspect and replace the pump-to-tank seal if necessary, and ensure the fuel pump inlet strainer is clean. Carefully align and insert the fuel pump/Fuel Level Sensor module into the tank, avoiding damage to the strainer, float arm, or float. Finally, reconnect the battery and allow the Powertrain Control Module (PCM) to relearn its former driveability and performance characteristics.
    Posted by GMPartsGiant Specialist
    Q:
    What needs to be done before removing the fuel tank for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    Disconnect the fuel supply and return lines from the fuel pump/fuel level sending unit module and soak up any spilled fuel.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    How do you reassemble the fuel pump/fuel level sensor module for the 2005 Saturn ION? Posted by Customer
    A:
    Slide the fuel level sensor unit back into place until you hear a click, ensuring that the float arm is correctly aligned.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 15947543, the Right Choice

To ensure reliability, purchase GM part # 15947543 Fuel Tank Meter/Pump SENSOR KIT. It is sometimes referred to as GM Fuel Tank Sending Unit, GM Fuel Level Sensor. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Cobalt models. It fits Pontiac G5. It also fits Saturn Ion.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 15947543 Fuel Tank Meter/Pump SENSOR KIT. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly