GM 5968098 Capsule/Headlamp/Fog Lamp Headlamp

You can Select Your Vehicle to check if 5968098 fits your vehicle.

Verify the tires are at their proper inflation pressure, clean the head lamp lenses, position the vehicle on a level surface facing a flat wall 25 ft. away, measure and record the distance from the floor to the center of the head lamp, place a strip of tape across the wall at this same height, place strips of tape on the wall, perpendicular to the first measurement, indicating the vehicle center line and the center line of both head lamps, rock the vehicle side-to-side a few times to allow the suspension to stabilize, and turn the lights on, adjust the head lamps to achieve a high intensity pattern.

Verify the tires are at their proper inflation pressure, clean the head lamp lenses, position the vehicle on a level surface facing a flat wall 25 ft.

Replace the high beam bulb assembly with another high beam assembly, and the low beam bulb assembly with another low beam assembly.

It is important to aim the headlights correctly to avoid blinding the driver of an oncoming vehicle and to ensure proper visibility on the road.

Remove the grille.

The high intensity zone of the low beam should be positioned two inches below the horizontal line and two inches to the right of the headlight vertical line. The top adjusting screw should be turned clockwise to raise the beam and counterclockwise to lower the beam. The side adjusting screw should be used to move the beam left or right.