Make sure this part fits

GM 19433017 PUMP KIT,P/S

2004-2012 GM

Customer Questions & Expert Answers (3)
GM 19433017 PUMP KIT,P/S
  • Part Description
    PUMP KIT,P/S
  • Replaces
    15192791, 88965491, 19369081
  • Manufacturer
    General Motors
Make sure this part fits
$232.18 MSRP: $366.97
You Save: $134.79 (37%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19433017
    Part DescriptionPUMP KIT,P/S
    ConditionNew
    Replaces15192791, 88965491, 19369081
    ManufacturerGeneral Motors
    SKU19433017
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2004-2012 Chevrolet Colorado4 Cyl 2.8L, 4 Cyl 2.9L, 5 Cyl 3.5L, 5 Cyl 3.7LCREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP
    2004-2012 GMC Canyon4 Cyl 2.8L, 4 Cyl 2.9L, 5 Cyl 3.5L, 5 Cyl 3.7LPICKUP, PICKUP CREW CAB, PICKUP EXTENDED CAB, PICKUP EXTENDED LENGTH
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 19433017 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove and install a power steering pump on Chevrolet Colorado? Posted by Customer
    A:
    Remove the power steering pump by first disconnecting the cable of the negative terminal of the battery and then removing the air filter assembly. Subsequently, remove the serpentine drive belt. Place drain pan beneath the power steering pump and use unwind flare nut wrench to remove the pressure hose fitting from the pump and therefore disengage the power steering pressure line and return hose then seal it to avoid entrance of contaminants. Lose the pulley from the pump with a special power steering pump pulley remover and release the wiring harness from the retainer on the pump. Subsequently, unscrew the pump mounting bolts and pull up the pump out of the car; fi Salvador Dali Erotic Prints Sketches And Paintings Of The Surreal Master avoid spilling the fluid on the painted areas. For installation, fit the pulley to the shaft using the pulley installer tool, the front of the hub must sit flat against the shaft. Insert the pump into the mounting bracket and use the mounting bolts or nuts and tighten them to the recommended torque. Attach the hoses to the pump ensuring that the fittings are well fixed in place. Last of all replace the drivebelt and the fan shroud, and fill the power steering reservoir with the recommended fluid, and then perform the bleeding process.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove and install a power steering pump on GMC Canyon? Posted by Customer
    A:
    Remove the power steering pump by first disconnecting the cable of the negative terminal of the battery and then removing the air filter assembly. Subsequently, remove the serpentine drive belt. Place drain pan beneath the power steering pump and use unwind flare nut wrench to remove the pressure hose fitting from the pump and therefore disengage the power steering pressure line and return hose then seal it to avoid entrance of contaminants. Lose the pulley from the pump with a special power steering pump pulley remover and release the wiring harness from the retainer on the pump. Subsequently, unscrew the pump mounting bolts and pull up the pump out of the car; fi Salvador Dali Erotic Prints Sketches And Paintings Of The Surreal Master avoid spilling the fluid on the painted areas. For installation, fit the pulley to the shaft using the pulley installer tool, the front of the hub must sit flat against the shaft. Insert the pump into the mounting bracket and use the mounting bolts or nuts and tighten them to the recommended torque. Attach the hoses to the pump ensuring that the fittings are well fixed in place. Last of all replace the drivebelt and the fan shroud, and fill the power steering reservoir with the recommended fluid, and then perform the bleeding process.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19433017, the Right Choice

To ensure reliability, purchase GM part # 19433017 PUMP KIT,P/S. It is sometimes referred to as GM Power Steering Pump. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Colorado models. It fits GMC Canyon.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 19433017 PUMP KIT,P/S. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly