Make sure this part fits

GM 19208471 Piston Kit,Engine

2010-2015 GM

Customer Questions & Expert Answers (4)
GM 19208471 Piston Kit,Engine
  • Part Description
    PISTON KIT, Engine Piston
  • Manufacturer
    General Motors
Make sure this part fits
$62.35 MSRP: $99.46
You Save: $37.11 (38%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19208471
    Part DescriptionPISTON KIT, Engine Piston
    Other NamesPiston
    Item Dimensions5.7 x 5.7 x 4.4 inches
    Item Weight1.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU19208471
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010-2014 Cadillac Escalade8 Cyl 6.2L Flex1/2 TON, EXT 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE
    2010-2015 Chevrolet Camaro8 Cyl 6.2LSS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE
    2010-2013 Chevrolet Silverado8 Cyl 6.2L FlexCREW CAB 1/2 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON
    2010-2013 GMC Sierra8 Cyl 6.2L FlexCREW CAB 1/2 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON
    2010-2014 GMC Yukon8 Cyl 6.2L Flex1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 19208471 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install piston/connecting rod assemblies on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL? Posted by Customer
    A:
    When removing piston/connecting rod assemblies, start by checking for ridges at the upper limit of ring travel in each cylinder and remove them if present to avoid piston breakage. For verifying connecting rod endplay with feeler gauges, make sure that it does not exceed the service limit. The connecting rods and caps must be carefully labeled for proper reassembly. After removing the bearing insert, remove connecting rod cap fasteners and push the connecting rod/piston assembly out of the engine. To protect them, place the removed heads on blocks of wood. While installing piston rings, check and adjust ring end gaps so they are within specified limits and install rings correctly on each piston. Lubricate pistons, rings and cylinders with engine oil during installation and use a piston ring compressor. Make sure cylinder walls are clean when installing piston/connecting rod assemblies; apply engine oil to them; then guide each assembly into a cylinder being careful about its orientation. Verify connecting rod bearing oil clearance using Plastigage to ensure it meets specifications Apply grease or assembly lube to bearing faces before final installation of rod caps and bolts Repeat these steps for all piston/connecting rod assemblies; then rotate the crankshaft by hand checking for binding Finally, check correct connecting rod endplay, take rods for resizing if new components were installed.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done after installing all piston/connecting rod assemblies for the 2010 Chevrolet Silverado? Posted by Customer
    A:
    After installing all piston/connecting rod assemblies, you should rotate the crankshaft by hand to check for any binding. It is also important to check the connecting rod endplay for correctness. If necessary, the rods may need to be taken for resizing if new components were installed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be done during piston ring installation for the 2007 GMC Sierra? Posted by Customer
    A:
    During piston ring installation, you should check and adjust the ring end gaps to ensure they are within specified limits. The rings should be installed correctly on each piston. It is important to lubricate the pistons, rings, and cylinders with engine oil during installation. Additionally, a piston ring compressor should be used.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19208471, the Right Choice

To ensure reliability, purchase GM part # 19208471 Piston Kit,Engine. It is sometimes referred to as GM Piston. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Cadillac Escalade models. It fits Chevrolet Camaro, Silverado. It also fits GMC Sierra, Yukon.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 19208471 Piston Kit,Engine. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly