×
Contact Us Live Chat or 1-888-737-9766
My Garage
My Account
Cart
Search Bar
Search by Part Number, Part Name, or Vehicle
Track Order Help Center
Make sure this part fits

GM 12680871 Lifter Assembly, Vlv (Afm)

Customer Questions & Expert Answers (13)
GM 12680871 Lifter Assembly, Vlv (Afm)
GM 12680871 Lifter Assembly, Vlv (Afm)
GM 12680871 Lifter Assembly, Vlv (Afm)
GM 12680871 Lifter Assembly, Vlv (Afm)
GM 12680871 Lifter Assembly, Vlv (Afm)
GM 12680871 Lifter Assembly, Vlv (Afm)
GM 12680871 Lifter Assembly, Vlv (Afm)
GM 12680871 Lifter Assembly, Vlv (Afm)
  • Part Description
    Lifter Assembly, Vlv (Afm)
  • Replaced By
    12698946
  • Manufacturer
    General Motors
Make sure this part fits
$45.81 MSRP: $79.72
You Save: $33.91 (43%)
1
ADD TO CART
  • Product Specifications
  • Customer Questions & Expert Answers

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number12680871
    Part DescriptionLifter Assembly, Vlv (Afm)
    Other NamesValve Lifters
    Item Dimensions4.2 x 2.0 x 2.0 inches
    Item Weight4.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU12680871
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Customer Questions & Expert Answers

    Q:
    What should be done to inspect the camshaft for the 2007 Chevrolet Avalanche? Posted by Customer
    A:
    To inspect the camshaft, the lobe height and base circle should be measured to determine the lobe lift. The results should be compared to the specifications, and the camshaft should be replaced if necessary. The camshaft bearing journals should also be inspected for wear and damage, and measured with a micrometer. The camshaft lobes should be checked for discoloration, score marks, chipped areas, and uneven wear.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What should be done during inspection of the camshaft for the 2012 Chevrolet Avalanche? Posted by Customer
    A:
    During inspection of the camshaft, you should: 1. Clean the lifter and camshaft with solvent. 2. Check for wear and damage on the lifter and camshaft. 3. Measure the journals and cam lobes for wear. 4. Replace the camshaft and bearings if they are damaged.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What are the steps to remove the camshaft for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    The steps to remove the camshaft are as follows:1. Remove the intake manifold.2. Remove the rocker arms.3. Remove the pushrods.4. Remove the timing chain.5. Remove the camshaft sprocket.6. Remove the balance shaft drive gear.7. Remove the fan, radiator, and condenser.8. Store the lifters in a labeled box.9. Remove the lifter retainer.10. Extract the lifters from the bores using a special tool, magnet, or your fingers.11. Remove the camshaft retainer plate.12. Use three 6-inch long, 5/16-18 bolts as a handle to remove the camshaft from the block.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What final steps should be taken after installing the camshaft for the 2013 Chevrolet Silverado? Posted by Customer
    A:
    After installing the camshaft, the cooling system should be refilled, the oil should be changed, and a new oil filter should be installed before starting and running the engine.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    How should the lifters be stored before removing them for the 2009 Chevrolet Suburban? Posted by Customer
    A:
    The lifters should be stored in a clearly labeled box before removing them.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What are the steps to remove the camshaft for the 2012 Chevrolet Suburban? Posted by Customer
    A:
    The steps to remove the camshaft are as follows: 1. Remove the intake manifold. 2. Remove the rocker arms. 3. Remove the pushrods. 4. Remove the timing chain. 5. Remove the camshaft sprocket. 6. Remove the balance shaft drive gear. 7. Remove the fan, radiator, and condenser. 8. Store the lifters in a labeled box. 9. Remove the lifter retainer. 10. Extract the lifters from the bores using a special tool, magnet, or your fingers. 11. Remove the camshaft retainer plate. 12. Use three 6-inch long, 5/16-18 bolts as a handle to remove the camshaft from the block.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What are the steps to remove the camshaft for the 2009 Chevrolet Silverado? Posted by Customer
    A:
    The steps to remove the camshaft are as follows:1. Remove the intake manifold.2. Remove the rocker arms.3. Remove the pushrods.4. Remove the timing chain.5. Remove the camshaft sprocket.6. Remove the balance shaft drive gear.7. Remove the fan, radiator, and condenser.8. Store the lifters in a labeled box.9. Remove the lifter retainer.10. Extract the lifters from the bores using a special tool, magnet, or your fingers.11. Remove the camshaft retainer plate.12. Use three 6-inch long, 5/16-18 bolts as a handle to remove the camshaft from the block.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    How should the lifters be stored before removing them for the 2011 Chevrolet Tahoe? Posted by Customer
    A:
    The lifters should be stored in a clearly labeled box before removing them.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    How should the lifters be stored before removing them for the 2010 GMC Sierra? Posted by Customer
    A:
    The lifters should be stored in a clearly labeled box before removing them.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What are the steps to remove the camshaft for the 2013 GMC Yukon? Posted by Customer
    A:
    The steps to remove the camshaft are as follows:1. Remove the intake manifold.2. Remove the rocker arms.3. Remove the pushrods.4. Remove the timing chain.5. Remove the camshaft sprocket.6. Remove the balance shaft drive gear.7. Remove the fan, radiator, and condenser.8. Store the lifters in a labeled box.9. Remove the lifter retainer.10. Extract the lifters from the bores using a special tool, magnet, or your fingers.11. Remove the camshaft retainer plate.12. Use three 6-inch long, 5/16-18 bolts as a handle to remove the camshaft from the block.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What are the steps to remove the camshaft for the 2011 GMC Sierra? Posted by Customer
    A:
    The steps to remove the camshaft are as follows:1. Remove the intake manifold.2. Remove the rocker arms.3. Remove the pushrods.4. Remove the timing chain.5. Remove the camshaft sprocket.6. Remove the balance shaft drive gear.7. Remove the fan, radiator, and condenser.8. Store the lifters in a labeled box.9. Remove the lifter retainer.10. Extract the lifters from the bores using a special tool, magnet, or your fingers.11. Remove the camshaft retainer plate.12. Use three 6-inch long, 5/16-18 bolts as a handle to remove the camshaft from the block.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What final steps should be taken after installing the camshaft for the 2009 GMC Yukon? Posted by Customer
    A:
    After installing the camshaft, the cooling system should be refilled, the oil should be changed, and a new oil filter should be installed before starting and running the engine.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    How many lifters come in one order? Posted by Customer
    A:
    It is 1 lifter per order as they are sold individually
    Posted by GMPartsGiant Specialist 25/2/2021
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 12680871, the Right Choice

To ensure reliability, purchase GM part # 12680871 Lifter Assembly, Vlv (Afm). It is sometimes referred to as GM Lash Adjuster. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 12680871 Lifter Assembly, Vlv (Afm). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly