GM 15264217 Headlamp Assembly(W/ Parking & Turn Signal Lamp)

You can Select Your Vehicle to check if 15264217 fits your vehicle.

To take out the headlight housing on a Cobalt, first pull out the bumper cover pushpin located near the headlight's inner part. Next, get rid of two bolts holding the headlight housing. Pull forward the headlight housing and then unplug all electrical connectors. On ION models, remove two pins retaining the headlight housing and then disconnect electrical connectors. For HHR models, take off front bumper cover as well as other bolts that keep the headlight housing in place. Continue to lower down until its locking tabs at back are free of those resistance points. Next pull it forward until all locking pins come out and you can detach bulb wires from their connectors. In all cases, installing is opposite of removal. Last of all do remember to adjust your headlights when finished with them.

On HHR models, the vertical adjustment screw is found under the inner fender flange.