GM 13427161 Fan Assembly, Engine Cooler

You can Select Your Vehicle to check if 13427161 fits your vehicle.

To remove the radiator fan, start by disconnecting the cable from the negative battery terminal. Then, remove the front bumper cover and the radiator support center bar fasteners and bar. Next, take off the radiator upper air seal and, if applicable, the charge air cooler inlet and outlet pipes on 2016 and later 1.4L engines. Remove the air baffles from both sides of the radiator and the radiator upper mounting bolts. Reposition the radiator by moving it towards the front of the vehicle. Disconnect the fan motor electrical connector and ground wire nut, and separate the harness from the clips on the fan shroud. Position the harness off to the side. Finally, remove the four mounting clips and slide the fan shroud towards the right side, then tilt the left side of the fan shroud up and maneuver it out of the vehicle. To install, simply reverse the removal steps.