GM 20913557 Cover Assembly, Air Cleaner Housing

You can Select Your Vehicle to check if 20913557 fits your vehicle.

To remove the air intake duct first take off the PCV fresh air hose from the valve cover. At this point, loosen clamps at the throttle body and air filter box then lift off the duct. To remove the air filter box relieve fuel system pressure first and disconnect electrical connector from MAF sensor. Loosen clamp and detach duct from air filter box. Remove the hood release cable mounting clip as well as air filter box cover and filter element. The fuel supply line is disconnected from fuel rail while EVAP line is disconnected from purge solenoid. Powertrain Control Module (PCM) is released from bracket and moved aside away from air filter box. Finally, remove fastener that mounts air filter box then lift off box. The reverse of removal steps will be followed during installation process.

First, relieve the fuel system pressure. - Disconnect the electrical connector from the MAF sensor. - Loosen the clamp and detach the duct from the air filter housing. - Remove the air filter housing cover and filter element. - Remove the hood release cable mounting clip. - Disconnect the fuel supply line from the fuel rail and the EVAP line from the purge solenoid. - Release the Powertrain Control Module (PCM) from the bracket and position it away from the air filter housing. - Finally, remove the air filter housing mounting fastener and lift off the housing.

The installation process is the reverse of the removal steps.