GM 95985382 Console, Front Floor *Cocoa

You can Select Your Vehicle to check if 95985382 fits your vehicle.

Disconnect the cable from the negative battery terminal. Use a trim tool to pry out the trim panel from each side of the console. For 2015 and earlier models, pry out the transaxle shifter bezel and disconnect the electrical connectors from the panel. Remove the center storage compartment screws and pull the storage compartment out of the console. Pry out the rear panel to disengage the retaining clips and disconnect the electrical connector. Remove the top trim plate screw cover and the screw. Open the armrest, remove the small piece of carpet at the bottom of the storage compartment, and take out the mounting screws. Remove the perimeter mounting screws around the console, lift off the main console panel, and disconnect the electrical connectors at the front. Reconnect the battery. For 2016 and later models, remove the instrument panel fuse block access cover from the front of the console and disengage the access cover frame fasteners, carefully prying the panel away from the instrument panel. On manual transaxle models, place the gear shift lever into reverse, disengage the retaining tabs around the shift boot, and lift it up to disconnect the electrical connectors. On automatic transaxle models, disengage the clips starting at the rear of the boot, lift it over the shift handle, and remove the shift lever knob. For models with a parking brake handle, pull up on the handle and use a trim tool to disengage the brake lever boot retaining clips. There are three mounting screws on both sides of the console; slide the front seats to access and remove the screws. Lift the console up, disconnect any electrical connectors, and remove the console. Installation is the reverse of removal.