Make sure this part fits

GM 22720704 Caliper Assembly, Front Brake

2004-2008 GM

Customer Questions & Expert Answers (3)
GM 22720704 Caliper Assembly, Front Brake
  • Part Description
    CALIPER, Wheel Brake Cylinder/Caliper
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number22720704
    Part DescriptionCALIPER, Wheel Brake Cylinder/Caliper
    Other NamesCaliper
    Item Dimensions9.7 x 7.5 x 5.4 inches
    Item Weight13.30 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU22720704
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2008 Chevrolet Cobalt4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR
    2007-2008 Pontiac G54 Cyl 2.2L, 4 Cyl 2.4LGT 2 DOOR, GT 4 DOOR, SPORT 2 DOOR, SPORT 4 DOOR
    2005-2006 Pontiac Pursuit4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR
    2004-2007 Saturn Ion4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4LREDLINE 2 DOOR
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 22720704 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the rear brakes for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    To remove the rear brakes, start by loosening the lug nuts on the rear wheels. Then, raise the rear of the vehicle and secure it on jackstands. Remove the rear wheels. Inside the vehicle, remove the boot around the parking brake handle and loosen the adjuster nut for the parking brake cable. Disconnect the parking brake cable end from the caliper lever and detach the cable from the caliper bracket. Depress the caliper piston with a C-clamp, unscrew the brake line banjo fitting, and detach the brake line from the caliper, plugging it to prevent contamination. Use an open-end wrench to hold the flats on the caliper guide pins while removing the guide pin bolt. Detach the caliper from its mounting bracket. To install the caliper, reverse the removal procedure, tightening the caliper guide pin bolts and brake line banjo fitting bolt to the specified torque. Bleed the brake system, install the wheels and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque. Finally, adjust the parking brake.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you remove the front brakes for the 2006 Saturn ION? Posted by Customer
    A:
    Start by loosening the lug nuts on the front wheels, but don't remove them completely. Then, raise the front of the vehicle and secure it on jackstands. Remove the front wheels. Disconnect the brake line from the caliper and plug it to prevent contaminants from entering the brake system and to minimize brake fluid loss. For calipers without Brembo, remove the caliper guide pin bolts and detach the caliper from its mounting bracket. For models with Brembo calipers, remove the two caliper mounting bolts and detach the caliper from the steering knuckle. To install the caliper, reverse the removal procedure, ensuring to replace the copper sealing washers on the brake line fitting. Tighten the caliper guide pin bolts and brake line banjo fitting bolt to the specified torque. Bleed the brake system, install the wheels and lug nuts, and lower the vehicle, tightening the lug nuts to the specified torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 22720704, the Right Choice

To ensure reliability, purchase GM part # 22720704 Caliper Assembly, Front Brake. It is sometimes referred to as GM Brake Caliper Repair Kit, GM Brake Calipers. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Cobalt models. It fits Pontiac G5, Pursuit. It also fits Saturn Ion.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 22720704 Caliper Assembly, Front Brake. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly