GM 15828918 Bulb,Daytime Running Lamp

You can Select Your Vehicle to check if 15828918 fits your vehicle.

To remove the bulb, start by opening the hood to access the bulb from behind the headlight housings and remove the radiator grille to gain access. Once you have access, twist the bulb holder counterclockwise and remove it along with the connector from the housing. Then, disconnect the connector from the bulb holder.

To get the headlight housing out of Cobalt models, all you have to do is pull it out so that you can reach the bulbs from behind. Turn the headlight retaining ring to the left and remove the large bulb holder in order to change the bulb. The installation is done by doing exactly opposite of what was done during removal. On ION models, pull out the headlight housing and then remove round dust caps above bulb sockets. Unplug the electrical connector for a light bulb on a car and turn it 1/4-turn counterclockwise to disengage it from a headlamp assembly. When fitting a new lamp into its socket, align three notches on its base with lugs inside light assembly. The installation process is otherwise identical to that of removal. For sedans, take out inner fender liner and unplug connectors for lamps. Twist headlight bulb in counterclockwise direction and remove it before replacing. The installation procedure is contrary to what was performed during dismantling.

Unclip the headlight bulb retainer springs and remove the bulb.

Simply reverse the steps taken during removal.

Disconnect the headlight bulb electrical connector, rotate the bulb holder counterclockwise, and remove it from the housing.

Start by opening the hood to access the bulb from behind the headlight housings. In some cases, you may need to remove the radiator grille to gain access.

Twist it clockwise to lock it in place.