Make sure this part fits

GM 26059671 Boot Kit,Front Wheel Drive Shaft Cv Joint

1997-2009 GM

Customer Questions & Expert Answers (7)
GM 26059671 Boot Kit,Front Wheel Drive Shaft Cv Joint
  • Part Description
    BOOT KIT, Front Axle
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$36.74 MSRP: $57.80
You Save: $21.06 (37%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number26059671
    Part DescriptionBOOT KIT, Front Axle
    Other NamesBoot Kit, Outer Boot
    Item Dimensions8.0 x 7.0 x 7.0 inches
    Item Weight1.60 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU26059671
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2004-2007 Buick Rainier6 Cyl 4.2L, 8 Cyl 5.3L4 DOOR
    1997-2005 Chevrolet Blazer6 Cyl 4.3L2 DOOR, 4 DOOR
    1997-2004 Chevrolet S104 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3LCREW CAB, PICKUP, PICKUP EXTENDED CAB
    2002-2009 Chevrolet Trailblazer6 Cyl 4.2L, 8 Cyl 5.3L, 8 Cyl 6.0L4 DOOR, 4 DOOR EXT
    2002-2009 GMC Envoy6 Cyl 4.2L, 8 Cyl 5.3L4 DOOR, 4 Door XL, 4 DOOR XUV
    1997-2001 GMC Jimmy6 Cyl 4.3L2 DOOR, 4 DOOR
    1997-2004 GMC Sonoma4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L4 DOOR, PICKUP, PICKUP EXTENDED CAB
    1997-2004 Oldsmobile Bravada6 Cyl 4.2L, 6 Cyl 4.3L4 DOOR, BRAVADA
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 26059671 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and replace CV boot on a driveaxle? Posted by Customer
    A:
    To remove and replace the CV joints on a driveaxle, start by removing the driveaxle and placing it in a vise lined with rags to protect the shaft. For the inner CV joint, cut off the boot seal retaining clamps and slide the boot towards the center of the driveaxle. Remove the tri-pot housing from the spider assembly and then remove the spider assembly from the axle by removing the inner and outer retaining rings. Clean all the old grease from the housing and spider assembly, and inspect for any signs of wear. Pack the housing with grease and place the remainder in the CV boot. Slide the CV boot onto the axle and install the spider assembly with the recess facing the end of the driveaxle. Install the tri-pot housing and adjust the collapsed dimension of the joint before installing the retaining clamps and the driveaxle. For the outer CV joint, tap lightly around the seal retaining ring to remove it and cut off the band retaining the CV boot to the shaft. Remove the snap-ring and slide the joint assembly off. Remove the old CV boot and mark the inner race and cage for reassembly. Remove the balls from the cage and remove the inner race from the cage. Clean all the components and inspect for wear. To install, reverse the disassembly steps, ensuring the marks on the inner race and cage are visible after installation. Pack the CV joint assembly with grease and install the CV boot on the driveaxle. Position the CV joint assembly on the driveaxle and drive it onto the shaft until the retaining ring is seated. Install the CV boot and retaining clamp, and secure the seal retainer. Finally, install the driveaxle.
    Posted by GMPartsGiant Specialist
    Q:
    How can the driveaxle boots be inspected for the 2002 Chevrolet Blazer? Posted by Customer
    A:
    The driveaxle boots can be inspected by pushing on the boot and checking for cracks or leaking grease in the indicated area.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How should the driveaxle boots be cleaned for the 2002 Chevrolet S10? Posted by Customer
    A:
    The driveaxle boots should be cleaned with soap and water. It is advisable to avoid oil and grease as they can lead to premature deterioration of the boot material.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    Why is regular inspection of the driveaxle boots necessary for the 1999 GMC Jimmy? Posted by Customer
    A:
    Regular inspection of the driveaxle boots is necessary to check for signs of tears, cracks, and loose clamps.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How can the driveaxle boots be inspected for the 2004 GMC Sonoma? Posted by Customer
    A:
    The driveaxle boots can be inspected by pushing on the boot and checking for cracks or leaking grease in the indicated area.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    what is all included in this kit? I am looking for boot, clamps, grease and inner retainer ring. Posted by Customer: 2008 Light Truck Trailblazer / Envoy / Rainier (4WD / AWD)
    A:
    boot, clamps, grease, and inner retainer ring ARE INCLUDED...
    Posted by GMPartsGiant Specialist 23/8/2022
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 26059671, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 26059671 Boot Kit,Front Wheel Drive Shaft Cv Joint. It is sometimes referred to as GM CV Boot. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Buick Rainier models. It fits Chevrolet Blazer, S10, Trailblazer. It also fits GMC Envoy, Jimmy, Sonoma. This also fits Oldsmobile Bravada.

Affordable, reliable and built to last, GM part # 26059671 Boot Kit,Front Wheel Drive Shaft Cv Joint stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly