Make sure this part fits

GM 26028006 Boot Kit,Front Wheel Drive Shaft Cv Joint

1983-1996 GM

Customer Questions & Expert Answers (8)
GM 26028006 Boot Kit,Front Wheel Drive Shaft Cv Joint
  • Part Description
    BOOT KIT, Front Axle
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number26028006
    Part DescriptionBOOT KIT, Front Axle
    Other NamesBoot, Inner Boot, Outer Boot
    Item Dimensions6.7 x 5.8 x 6.1 inches
    Item Weight1.50 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU26028006
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1995-1996 Chevrolet Blazer6 Cyl 4.3L2 DOOR, 4 DOOR
    1983-1996 Chevrolet S104 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L2 DOOR, 4 DOOR, PICKUP
    1992-1996 GMC Jimmy6 Cyl 4.3L2 DOOR, 4 DOOR
    1983-1991 GMC S154 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L2 DOOR, 4 DOOR, PICKUP
    1991-1996 GMC Sonoma4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3LPICKUP
    1991 GMC Syclone6 Cyl 4.3LPICKUP
    1992-1993 GMC Typhoon6 Cyl 4.3L2 DOOR, 4 DOOR
    1996, 1991-1994 Oldsmobile Bravada6 Cyl 4.3LBRAVADA
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 26028006 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What is the importance of driveaxle boots and how should they be maintained? Posted by Customer
    A:
    CV boots are necessary because they function as a shield that prevents dirt, water, and debris from getting inside to destroy the constant velocity (CV) joints. Also, it is important to inspect them for tears, cracks, and loose clamps periodically. This can be done by tearing over time but regularly checking for tears, cracks and loose clamps on the boot on the pointed area if there any cracks or grease on it. In case of cracked covers or if the grease comes out through small opening then new boots have to be installed.
    Posted by GMPartsGiant Specialist
    Q:
    How can the driveaxle boots be inspected for the 2003 Chevrolet Blazer? Posted by Customer
    A:
    The driveaxle boots can be inspected by pushing on the boot and checking for cracks or leaking grease in the indicated area.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How do you install the CV joint assembly for the 2003 Chevrolet Blazer? Posted by Customer
    A:
    To install the CV joint assembly, you need to reverse the disassembly steps, ensuring the marks on the inner race and cage are visible after installation. Pack the CV joint assembly with grease and install the boot on the driveaxle. Position the CV joint assembly on the driveaxle and drive it onto the shaft until the retaining ring is seated. Finally, install the boot and retaining clamp, and secure the seal retainer.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What is the final step in the process for the 1998 Chevrolet S10? Posted by Customer
    A:
    The final step is to install the driveaxle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should you do after removing the inner CV joint for the 1999 GMC Jimmy? Posted by Customer
    A:
    After removing the inner CV joint, you should clean all the old grease from the housing and spider assembly, and inspect for any signs of wear. Then, pack the housing with grease and place the remainder in the boot. Slide the boot onto the axle and install the spider assembly with the recess facing the end of the driveaxle. Finally, install the tri-pot housing and adjust the collapsed dimension of the joint before installing the retaining clamps and the driveaxle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should you do after removing the outer CV joint for the 1995 GMC Sonoma? Posted by Customer
    A:
    After removing the outer CV joint, you should remove the old boot and mark the inner race and cage for reassembly. Remove the balls from the cage and remove the inner race from the cage. Clean all the components and inspect for wear.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    Why is regular inspection of the driveaxle boots necessary for the 1999 GMC Sonoma? Posted by Customer
    A:
    Regular inspection of the driveaxle boots is necessary to check for signs of tears, cracks, and loose clamps.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 26028006, the Right Choice

To ensure reliability, purchase GM part # 26028006 Boot Kit,Front Wheel Drive Shaft Cv Joint. It is sometimes referred to as GM CV Boot. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Blazer, S10 models. It fits GMC Jimmy, S15, Sonoma. It also fits Oldsmobile Bravada.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 26028006 Boot Kit,Front Wheel Drive Shaft Cv Joint. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly