GM 10306887 Blade Assembly, Windshield Wiper (Rh)

You can Select Your Vehicle to check if 10306887 fits your vehicle.

Windshield wiper and blade assembly should be inspected in terms of damages, loose ends, and worn out cracked blade elements and should be done periodically. Because of this it accumulate on the edges of wiper blades causing them to slow down or become ineffective and should be cleaned with a mild detergent solution. There always comes a time when the wiper blade elements are cracked, worn or warped or cannot clean anymore to the intended standards they should be replaced by new ones. To remove the wiper blade, the hood should be opened and the arm raised to clear glass, the locking mechanism has to be squeezed, and after that the wiper blade assembly has to be slid out of the hook in the end of the arm in order to replace the wiper blade. To unlock the blade holder, there is a locking tab located on the side of the arm to be pressed and then activate the wiper by swiveling the wiper blade away from the arm and to follow the direction of the arrow on the arm and push to remove the blade arm. Last of all, fix the new wiper on the arm ensured that it locks in place with an audible click.