Make sure this part fits

GM 25976721 Rear Axle Assembly (3.42 Ratio)

2009-2012 GM

Customer Questions & Expert Answers (11)
GM 25976721 Rear Axle Assembly (3.42 Ratio)
  • Part Description
    Axle Assembly, Rear (3.42 Ratio)
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25976721
    Part DescriptionAxle Assembly, Rear (3.42 Ratio)
    Other NamesAxle Assembly
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25976721
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2012 Chevrolet Colorado4 Cyl 2.9L, 5 Cyl 3.7L, 8 Cyl 5.3LCREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP
    2009-2012 GMC Canyon4 Cyl 2.9L, 5 Cyl 3.7L, 8 Cyl 5.3LPICKUP, PICKUP CREW CAB, PICKUP EXTENDED CAB, PICKUP EXTENDED LENGTH
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 25976721 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How can you check for wear in the CV joints and driveaxle shafts for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    To check for wear in the CV joints and driveaxle shafts, you can grasp each axle (one at a time) and rotate it in both directions while holding the CV joint housings, feeling for play indicating worn splines or sloppy CV joints. Also, check the driveaxle shafts for cracks, dents, and distortion.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    Is overhauling the differential a cost-effective DIY task for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    No, overhauling the differential typically requires special tools and is not cost-effective for DIY work.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do to disengage the retaining ring on the inner end of the driveaxle from the differential or intermediate shaft for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    To disengage the retaining ring on the inner end of the driveaxle from the differential or intermediate shaft, you should place the end of a brass drift against the inner driveaxle joint housing and apply enough force to disengage the ring.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after installing the brake drum, wheel, and lug nuts for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Lower the vehicle and tighten the lug nuts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What components should be disconnected from the rear axle assembly before removing it from under the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Before removing the rear axle assembly from under the vehicle, you should disconnect the shock absorbers at their lower mounts, disconnect the vent hose from the fitting on the axle housing, and disconnect the flexible brake hose from the junction block on the axle housing (and plug the hose to prevent fluid leakage).
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the axleshafts connected to the differential side gears for the 2007 GMC Canyon? Posted by Customer
    A:
    The axleshafts are splined to the differential side gears, allowing for speed difference.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of joints are used in the inner ends of the driveaxles, and what type of motion are they capable of for the 2007 GMC Canyon? Posted by Customer
    A:
    The inner ends of the driveaxles are equipped with sliding constant velocity (CV) joints, which are capable of both angular and axial motion.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do if the 2006 GMC Canyon has a conventional differential? Posted by Customer
    A:
    Remove the pinion shaft after removing the lock bolt.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after the 2008 GMC Canyon is securely raised and supported on jackstands? Posted by Customer
    A:
    After securely raising and supporting the vehicle on jackstands, you should remove the rear wheels.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What components should be tightened to specific torque values during the installation process for the 2011 GMC Canyon? Posted by Customer
    A:
    During installation, the suspension fasteners and wheel lug nuts should be tightened to specific torque values.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 25976721, the Right Choice

To ensure reliability, purchase GM part # 25976721 Rear Axle Assembly (3.42 Ratio). It is sometimes referred to as GM Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Colorado models. It fits GMC Canyon.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 25976721 Rear Axle Assembly (3.42 Ratio). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly