Make sure this part fits

GM 25870892 Front Shock Absorber Assembly

Customer Questions & Expert Answers (18)

GM 25870892 Front Shock Absorber Assembly

Part Description
Absorber Assembly, Front Shock ; Absorber, Front And Rear Suspension
Position
Front
Manufacturer
General Motors

Make sure this part fits

$83.83 MSRP: $185.62

You Save: $101.79 (55%)

ADD TO CART

Product Specifications
Customer Questions & Expert Answers

Product Specifications

Brand	Genuine GM
Manufacturer Part Number	25870892
Part Description	Absorber Assembly, Front Shock ; Absorber, Front And Rear Suspension
Item Dimensions	6.2 x 6.4 x 27.3 inches
Item Weight	6.50 Pounds
Position	Front
Condition	New
Fitment Type	Direct Replacement
Manufacturer	General Motors
SKU	25870892
Warranty	This genuine GM part is guaranteed by GM's factory warranty.
Shipping & Return	Shipping Policy Return Policy

Warning: California’s Proposition 65

Customer Questions & Expert Answers
Q:
How can you check for movement at the steering knuckle-to-control arm balljoint for the 2011 Chevrolet Avalanche? Posted by Customer
A:
Have an assistant grasp the lower edge of the tire and move the wheel in and out while you look for movement at the steering knuckle-to-control arm balljoint. If there is any movement, the suspension balljoint(s) must be replaced.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
How do you remove the 2008 Chevrolet Avalanche? Posted by Customer
A:
Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What is the first step to remove the shock absorber from the 2010 Chevrolet Avalanche? Posted by Customer
A:
The first step is to raise the rear of the vehicle and support it securely on jackstands placed underneath the frame rails.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
How do you remove the 2010 Chevrolet Tahoe? Posted by Customer
A:
Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
How should the rear axle be supported during the removal process of the 2008 Chevrolet Silverado? Posted by Customer
A:
The rear axle should be supported with a floor jack placed under the axle tube closest to the shock absorber being removed.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What might be the issue if the 2008 Chevrolet Suburban continues to move up and down or fails to return to its original position? Posted by Customer
A:
If the vehicle continues to move up and down or fails to return to its original position, it may indicate a worn or weak shock absorber.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What are the initial steps for inspecting 2007 Chevrolet Tahoe suspension and shocks? Posted by Customer
A:
Start by parking the vehicle on level ground, turning off the engine, and setting the parking brake. Check the tire pressures. Push down at one corner of the vehicle and then release it while noting the movement of the body. It should stop moving and come to rest in a level position within one or two bounces.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
How do you remove the 2012 Chevrolet Suburban? Posted by Customer
A:
Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
How do you install the coil-over shock absorber2012 Chevrolet Silverado? Posted by Customer
A:
To install, reverse the removal steps and tighten the mounting fasteners to the torque specifications. If equipped with a suspension control system, reconnect the electrical connector to the top of the shock absorber.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What should be done after supporting the rear axle for the 2007 Chevrolet Tahoe? Posted by Customer
A:
After supporting the rear axle, the shock absorber upper and lower mounting fasteners should be removed.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
How can you check for play in the steering system components for the 2012 Chevrolet Silverado? Posted by Customer
A:
Grasp each front tire at the front and rear edges, push in at the front, pull out at the rear, and feel for play in the steering system components. If any free play is noted, check the idler arm and the tie-rod ends for looseness.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What is the first step to remove the shock absorber from the 2011 Chevrolet Suburban? Posted by Customer
A:
The first step is to raise the rear of the vehicle and support it securely on jackstands placed underneath the frame rails.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
How do you install the 2013 GMC Sierra? Posted by Customer
A:
To install, reverse the removal steps and ensure the lower mounting bolt is pointing in the same direction as before.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What is the first step to remove the shock absorber from the 2013 GMC Sierra? Posted by Customer
A:
The first step is to raise the rear of the vehicle and support it securely on jackstands placed underneath the frame rails.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What specific areas should be examined when inspecting the control arms for the 2011 GMC Sierra? Posted by Customer
A:
Examine the bushings where the control arms meet the chassis for damage and wear.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What should be done if the 2012 GMC Yukon is equipped with a ride control system? Posted by Customer
A:
If the vehicle is equipped with a ride control system, the electrical connector and the airline should be disconnected from the shock absorber.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What should be done if there is evidence of cracks or leaking lubricant in the CV boots for the 2014 GMC Yukon? Posted by Customer
A:
If there is any evidence of cracks or leaking lubricant in the CV boots, they must be replaced.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
How do you remove the 2009 GMC Yukon? Posted by Customer
A:
Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.
Posted by GMPartsGiant Specialist
See expert answers on similar Shock Absorber
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 25870892, the Right Choice

To ensure reliability, purchase GM part # 25870892 Front Shock Absorber Assembly. It is sometimes referred to as GM Shock Absorber. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 25870892 Front Shock Absorber Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you.

Why choose GM Parts Giant

Dedicated Service
Your complete satisfaction is our #1 goal
Lowest Prices
Best deals on genuine OE parts from dealerships
Fast Delivery
Orders are processed and delivered promptly