GM 19302776 Rear Leveling Shock Absorber Assembly

You can Select Your Vehicle to check if 19302776 fits your vehicle.

For a 2000 or later DeVille or a 1999 or later Seville, open the trunk, pull back the carpet, remove the dust cover, and unscrew the upper mounting nuts.

Start with the lower spring insulator and spring, followed by the upper spring insulator, spring seat, and bearing cap.

Remove the wheel and mark the relationship of the strut to the steering knuckle. Remove the brake hose bracket and ABS wiring harness bracket from the strut. Remove the strut-to-knuckle nuts and knock the bolts out with a soft-face hammer. On 1999 models, disconnect the stabilizer bar link from the strut. Separate the strut from the steering knuckle, being careful not to overextend the inner CV joint or stretch the brake hose. If equipped, unplug the electrical connector from the strut. Have an assistant support the strut assembly and remove the three strut upper mounting nuts or bolts. Remove the assembly through the fender well.