Chevrolet 24203894 Transmission Asm,Auto (5Cdd) (Remanufactured)

You can Select Your Vehicle to check if 24203894 fits your vehicle.

After securing the transmission in place, you should reinstall the dipstick tube, starter motor, vacuum hose(s) (if equipped), shift and TV linkage or cable, wire harness connectors, torque converter cover, driveshaft(s), speedometer cable, and exhaust system components.

The tools necessary for a transmission overhaul include internal and external snap-ring pliers, a bearing puller, a slide hammer, a set of pin punches, a dial indicator, and possibly a hydraulic press. A large, sturdy workbench and a vise or transmission stand are also required.

Support the engine and transmission separately, with the latter supported by a special jack. Remove the nuts from the crossmember bolts, raise the transmission slightly, and remove the crossmember. On heavy-duty (cast iron case) transmission models, remove the transmission-to-clutch housing bolts; on normal-duty models, remove the transmission-to-engine bolts. Ensure all wires are disconnected, and then move the transmission and jack toward the rear of the vehicle until the transmission input shaft is clear of the clutch or clutch housing. Lower the transmission, taking care not to depress the clutch pedal while it's out.