Chevrolet 22782942 Shoe Kit, Rear Parking Brake

You can Select Your Vehicle to check if 22782942 fits your vehicle.

To remove the rear brakes, start by loosening the wheel lug nuts and raising the rear of the vehicle on jackstands. Remove both rear wheels, but finish one side completely before disassembling the other. Next, remove the caliper bracket and the brake disc. Adjust the parking brake shoes inward to allow the disc to be removed. Place a drain pan under the wheel being worked on and wash the parking brake assembly with brake system cleaner. Remove the upper return spring and adjuster wheel assembly, and then remove the front shoe hold-down spring and spread the shoes apart to remove both shoes and the lower return spring. On earlier models, remove the rear shoe and lower return spring, then release the front shoe hold-down spring and remove the front shoe. Clean the backing plate and apply high-temperature brake grease to the areas where the brake shoes contact. To install, reverse the removal steps, making sure to rotate the star wheel of the adjuster assembly and properly seat the brake shoes in the brake actuator. Finally, adjust the parking brakes and tighten the wheel lug nuts to the proper torque.