Chevrolet 19258266 Seal Kit,Front Wheel Drive Shaft

You can Select Your Vehicle to check if 19258266 fits your vehicle.

To remove the wheel seal, start by raising the rear of the vehicle and supporting it securely on jackstands. Place the transaxle in Neutral and block the front wheels to prevent rolling. If working on the right rear wheel, remove the muffler assembly. Then, remove the wheel(s) carefully. Next, use a seal removal tool or a large screwdriver to pry out the wheel seal, being cautious not to damage the seal bore. For installation, use a seal installer or a large deep socket as a drift to drive the new wheel seal into the bore squarely and ensure it is completely seated. Lubricate the lip of the new seal with multi-purpose grease and then install the wheel, taking care not to damage the seal's lip. Finally, check the differential lubricant level and add more if necessary to reach the appropriate level.

Wheel leaks frequently occur due to wear of the wheel seals, which are located on the sides of the transaxle where the driveaxles are attached. If leakage of a seal is suspected, the vehicle should be raised and securely supported on jackstands.

The driveaxle oil seals are located on the sides of the transaxle where the driveaxles are attached.

To remove the driveaxle oil seal, start by raising the rear of the vehicle and supporting it securely on jackstands.

Place the transaxle in Neutral with the parking brake off.

If leakage of a seal is suspected, the vehicle should be raised and securely supported on jackstands.

To remove the driveaxle oil seal, use a seal removal tool or a large screwdriver to pry out the driveaxle oil seal, being cautious not to damage the seal bore.

Use a seal installer or a large deep socket as a drift to drive the new oil seal into the bore squarely and ensure it is completely seated.

Check the differential lubricant level and add more if necessary to bring it to the appropriate level.