Make sure this part fits

Chevrolet 22545259 Seal,Crankshaft Rear Oil

1993-2002 Chevrolet

Customer Questions & Expert Answers (7)
GM 22545259 Seal,Crankshaft Rear Oil
  • Part Description
    SEAL, Engine Rear Main Bearing
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$16.67 MSRP: $21.99
You Save: $5.32 (25%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number22545259
    Part DescriptionSEAL, Engine Rear Main Bearing
    Other NamesRear Main Seal
    Item Dimensions4.5 x 4.4 x 0.6 inches
    Item Weight0.50 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU22545259
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1993-1994 Chevrolet Beretta4 Cyl 2.3L2 DOOR, 4 DOOR, Z26 2 DOOR
    1995-2002 Chevrolet Cavalier4 Cyl 2.3L, 4 Cyl 2.4L2 DOOR, 4 DOOR, CONVERTIBLE, LS 4 DOOR, LS CONVERTIBLE, Z24 2 DOOR
    1993-1994 Chevrolet Corsica2 DOOR, 4 DOOR, Z26 2 DOOR
    1997-1999 Chevrolet Malibu4 Cyl 2.4L4 DOOR, LS 4 DOOR, LX 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 22545259 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to replace a rear main oil seal in 2.3L four cylinder (Quad-4) engine? Posted by Customer
    A:
    You can replace the one-piece type of a rear crankshaft seal without removing the engine. However, the transaxle must be removed and the engine supported during this process. First, remove the transaxle. Then, remove the pressure plate and clutch disc. Next, remove the flywheel. After that, remove the oil pan. Once the oil pan is off, there are bolts to be removed and then you can detach the seal housing along with peeling off all old gasket material from it. On a workbench, position the seal housing on top a couple of wooden blocks and drive out the old seal with a punch and hammer from the backside through. Don't cock seat in housing bore; just try to drive new seal into it using a block of wood or section of pipe if you have one large enough. Lubricate with moly-base grease for crankshaft seal journal and lip of new seal. Position new gasket on engine block. Slowly push new seal onto crankshaft. When you push housing against block as you work stiff lip over crankshaft with the end of an extension which is smooth, keep your eye on posture. Note: Slowly refers to pushing new seal on crankshaft. Actually, it should precede "slowly push". By install, tighten housing bolts. Finally, reinstall the transaxle.
    Posted by GMPartsGiant Specialist
    Q:
    What should be used to lubricate the seal lip for the 1990 Chevrolet Beretta? Posted by Customer
    A:
    The seal lip should be lubricated with moly-base grease or engine assembly lube.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should you do after installing the new seal for the 1989 Chevrolet Beretta? Posted by Customer
    A:
    Reinstall the vibration damper.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the first step in the procedure for this task for the 1987 Chevrolet Beretta? Posted by Customer
    A:
    The first step is to remove the flywheel/driveplate.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should you do before removing the crankshaft pulley for the 1994 Chevrolet Beretta? Posted by Customer
    A:
    Wrap the screwdriver tip with vinyl tape to protect the crankshaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should the new seal be lubricated for the 1994 Chevrolet Beretta? Posted by Customer
    A:
    Lubricate the seal lip with moly-base grease or clean engine oil.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 22545259, the Right Choice

To ensure reliability, purchase GM part # 22545259 Seal,Crankshaft Rear Oil. It is sometimes referred to as Chevrolet Crankshaft Seal. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Cavalier, Corsica, Malibu models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 22545259 Seal,Crankshaft Rear Oil. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly