Chevrolet 13580490 Pump Assembly, P/S

You can Select Your Vehicle to check if 13580490 fits your vehicle.

To remove the power steering pump, start by removing the drivebelt and draining as much fluid as possible from the reservoir. Place a drain pan under the pump and disconnect the feed hose and pressure line, plugging or capping all openings to prevent contamination. Then, remove the pump mounting fasteners and carefully guide the pump out through the right fender well, being cautious not to spill any fluid on painted surfaces. To install the new pump, position it and secure it with the mounting fasteners, tightening them to the specified torque. Connect the pressure line and feed hose, ensuring all connections are secure. Install the drivebelt and fill the power steering reservoir with the recommended fluid. Finally, bleed the system to ensure proper operation.

After removing the drivebelt and draining the fluid, place a drain pan under the pump and disconnect the feed hose and pressure line, plugging or capping all openings to prevent contamination.