Chevrolet 19131213 Motor,Blower(W/Impeller)

You can Select Your Vehicle to check if 19131213 fits your vehicle.

The front blower motor is on the right side of the dash. For removal, disconnect the battery's negative cable. Disconnect blower wiring and hose. Remove the glove box and right kick panel. On older models, disconnect the ECM wiring and remove a bolt from the instrument panel. For 1988-1991 models, unscrew the fan nut. For 1992 onwards, remove the motor shaft tip and detach the fan using a puller. On Suburban models, disconnect the battery, remove the rear trim panel, and unplug blower motor wiring. Then, remove the blower motor. Installation is the reverse process.

To remove the front heater assembly, follow these steps: Disconnect the negative cable from the battery. Disconnect the blower wiring and hose. Remove the glove box and right side kick panel if necessary. On older models, disconnect the ECM wiring connectors and remove the bolt from the right side of the instrument panel. Pull out the corner of the instrument panel for clearance. Remove the blower mounting screws and withdraw the motor and fan. On 1988-1991 models, the fan can be removed from the motor shaft after unscrewing the nut. For 1992 and later models, remove the plastic tip at the end of the motor shaft and use a puller or press to remove the fan from the motor shaft. When reinstalling the fan, leave a clearance of 0.22 inch between the fan and the motor mount plate.