Make sure this part fits

Chevrolet 20867261 Fuel Pump Flow Control Module Assembly

2011-2012 Chevrolet

Customer Questions & Expert Answers (6)
GM 20867261 Fuel Pump Flow Control Module Assembly
  • Part Description
    Module Assembly, Fuel Pump Flow Control
  • Manufacturer
    General Motors
Make sure this part fits
$101.16 MSRP: $410.72
You Save: $309.56 (76%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number20867261
    Part DescriptionModule Assembly, Fuel Pump Flow Control
    Other NamesControl Module, Fuel Pump Controller, Module
    Item Dimensions6.9 x 6.4 x 2.2 inches
    Item Weight0.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU20867261
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2012 Chevrolet Camaro6 Cyl 3.6L, 8 Cyl 6.2L2 DOOR CONVERTIBLE, 2 DOOR COUPE, LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE, SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE
    2011-2012 Chevrolet Cruze4 Cyl 1.4L, 4 Cyl 1.8LLS 4 DOOR NOTCHBACK, LT / LTZ 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK
    2011-2012 Chevrolet Equinox4 Cyl 2.4L, 6 Cyl 3.0LLS SUV, LT SUV, LTZ SUV
    2012 Chevrolet Orlando4 Cyl 2.4LLS 4 DOOR HIGH ROOF WAGON, LT 4 DOOR HIGH ROOF WAGON, LTZ 4 DOOR HIGH ROOF WAGON
    2012 Chevrolet Sonic4 Cyl 1.4L, 4 Cyl 1.8L4 DOOR HATCHBACK, 4 DOOR NOTCHBACK
    2011-2012 Chevrolet Volt4 Cyl 1.4L Flex4 DOOR HATCHBACK, LTZ 4 DOOR HATCHBACK
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 20867261 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and reinstall the fuel pump and fuel pump flow control module in a Chevrolet Camaro? Posted by Customer
    A:
    The vehicle has two fuel pump modules. The primary module includes the fuel pump, fuel level sender, and filter. The secondary module has a fuel level sender and fuel pick up. These parts can't be serviced separately. The Fuel Pump Driver Module (FPDM) regulates fuel pressure. To remove the primary module, relieve fuel pressure, disconnect the electrical connector and fuel line, rotate the locking ring counterclockwise, and pull the module out. Check and replace the O-ring if needed. The secondary module removal process is similar. The FPDM is behind the right-rear quarter trim panel. Access it by removing the rear seat and panel, disconnect the connector, and remove the mounting nut. Reinstall in reverse order.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the FPFCM module on Chevrolet Equinox and GMC Terrain? Posted by Customer
    A:
    To remove the fuel pump driver module(FPDM), disconnect the cable from the negative battery terminal. Open the liftgate and remove the spare tire cover and the left-side trim panel. Disconnect the electrical connector from the FPDM. Remove the FPDM mounting nuts and remove the module. Installation is the reverse of removal.
    Posted by GMPartsGiant Specialist
    Q:
    What should you do after disconnecting the battery cable of the 2007 Buick LaCrosse? Posted by Customer
    A:
    Remove the right-side trim panel in the trunk.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    How do you detach the module from the bracket for the 2011 Chevrolet Cruze? Posted by Customer
    A:
    To detach the module from the bracket, remove the nut and detach the module from the bracket. The FPFCM mounting nut is shown for 2015 and earlier models, while later models are mounted to the battery tray.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    How do you install the FPFCM module for the 2016 Chevrolet Equinox? Posted by Customer
    A:
    To install the FPFCM module, simply follow the steps in reverse order.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump Driver Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 20867261, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 20867261 Fuel Pump Flow Control Module Assembly. It is sometimes referred to as Chevrolet Fuel Pump Driver Module. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet Camaro, Cruze, Equinox models.

Affordable, reliable and built to last, GM part # 20867261 Fuel Pump Flow Control Module Assembly stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly