Make sure this part fits

Chevrolet 19178835 Module Asm,Electronic Ignition Control (W/O Coil)

1997-2003 Chevrolet

Customer Questions & Expert Answers (5)
GM 19178835 Module Asm,Electronic Ignition Control (W/O Coil)
  • Part Description
    Ignition Module
  • Replaces
    10490872
  • Manufacturer
    General Motors
Make sure this part fits
$311.63 MSRP: $561.50
You Save: $249.87 (45%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number19178835
    Part DescriptionIgnition Module
    Item Dimensions6.0 x 4.1 x 2.8 inches
    Item Weight0.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10490872
    ManufacturerGeneral Motors
    SKU19178835
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1997-1999 Chevrolet Blazer2 DOOR, 4 DOOR
    1997-2002 Chevrolet Cavalier4 Cyl 2.2L2 DOOR, 4 DOOR, CONVERTIBLE, LS 4 DOOR, LS CONVERTIBLE, Z24 2 DOOR
    1997-2003 Chevrolet S104 Cyl 2.2L, 4 Cyl 2.2L FlexPICKUP
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 19178835 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do I perform a check and remove the Enhanced Distributor Ignition (EDI) System of the 1998 Chevrolet Blazer? Posted by Customer
    A:
    For EDI System check, examine the crankshaft sensor reference voltage and resistance, and inspect the crankshaft sensor circuit for any issues.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Ignition Control Module
    Q:
    How do I perform a check and remove the Enhanced Distributor Ignition (EDI) System for the 1994 Chevrolet S10? Posted by Customer
    A:
    For EDI System check, examine the crankshaft sensor reference voltage and resistance, and inspect the crankshaft sensor circuit for any issues. To remove the EDI ignition module, detach the negative battery cable, disconnect the ignition module electrical connector, remove both module attaching screws, and lift the module from its mount. For installation, secure the module with screws and plug in the electrical connector. Reattach the cable to the negative terminal of the battery.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Ignition Control Module
    Q:
    How do I perform a check and remove the Enhanced Distributor Ignition (EDI) System for the 1998 GMC Jimmy? Posted by Customer
    A:
    For EDI System check, examine the crankshaft sensor reference voltage and resistance, and inspect the crankshaft sensor circuit for any issues. To remove the EDI ignition module, detach the negative battery cable, disconnect the ignition module electrical connector, remove both module attaching screws, and lift the module from its mount. For installation, secure the module with screws and plug in the electrical connector. Reattach the cable to the negative terminal of the battery.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Ignition Control Module
    Q:
    How do I remove and install the distributor for the 2003 GMC Sonoma? Posted by Customer
    A:
    To remove the distributor, disconnect the negative battery terminal, remove the distributor cap and rotor, and disconnect the electrical connectors from the module. Remove both module attaching screws and lift the module away from the distributor. If reusing the same module, avoid wiping off the grease from the module or distributor base. For installation, apply silicone grease on the module face and distributor base if using a new module. Install the module, attach both electrical leads, and then reinstall the distributor rotor and cap. Finally, reattach the cable to the negative battery terminal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Ignition Control Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19178835, the Right Choice

To ensure reliability, purchase GM part # 19178835 Module Asm,Electronic Ignition Control (W/O Coil). It is sometimes referred to as Chevrolet Ignition Control Module. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Blazer, Cavalier, S10 models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 19178835 Module Asm,Electronic Ignition Control (W/O Coil). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly