Chevrolet 19426299 MODULE KIT,F/TNK F/PMP

You can Select Your Vehicle to check if 19426299 fits your vehicle.

To check the fuel pump, sit in the vehicle with windows closed and turn ignition key to ON. Listen for pump sound as it pressurizes fuel system. If no sound, remove fuel filler cap and have assistant turn ignition switch to ON while you listen. Check fuse, relay, wiring, and replace pump if necessary. Connect fuel pressure gauge to test port on fuel feed line and start engine. Compare gauge reading to specifications. If pressure is low, check filter, lines, and hoses for issues. Replace fuel pump module if regulator is stuck open.

Remove the fuel filler cap and have an assistant turn the ignition switch to ON while you listen for the sound of the pump operating.

To remove the fuel pump/fuel level sending unit module, you need to remove the fuel tank and disconnect the EVAP vent line, fuel tank vent line fitting, and fuel supply line quick-connect fittings from the fuel pump/fuel level sending unit mounting flange. Then, using water pump pliers, unscrew the fuel pump/fuel level sending unit module lock ring and remove the pump assembly, taking care not to damage the fuel level sensor float arm and float.

Remove the sensor unit from the fuel pump module.

No, further disassembly is not possible.

Before removing the fuel pump/fuel level sending unit module, you should disconnect the cable from the negative battery terminal and relieve the system fuel pressure.