Make sure this part fits

Chevrolet 13512934 Fuel Tank Fuel Pump Module Kit (W/O Fuel Level Se

2015-2016 Chevrolet Tahoe

Customer Questions & Expert Answers (4)
GM 13512934 Fuel Tank Fuel Pump Module Kit (W/O Fuel Level Se
  • Part Description
    Module Kit, Fuel Tank Fuel Pump (W/O Fuel Level Se
  • Replaces
    13582493
  • Manufacturer
    General Motors
Make sure this part fits
$358.50 MSRP: $753.18
You Save: $394.68 (53%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number13512934
    Part DescriptionModule Kit, Fuel Tank Fuel Pump (W/O Fuel Level Se
    Other NamesFuel Pump, Fuel Pump Assembly
    Item Dimensions14.6 x 14.8 x 14.7 inches
    Item Weight7.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces13582493
    ManufacturerGeneral Motors
    SKU13512934
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2015-2016 Chevrolet Tahoe8 Cyl 5.3L1500 4 DOOR UTILITY
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 13512934 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install a fuel pressure sensor and high-pressure fuel pump on Cadillac Escalade? Posted by Customer
    A:
    Remove the engine covers. Relieve the fuel system pressure. Disconnect the cable from the negative battery terminal. Remove the intake manifold and the fuel pump/fuel rail insulator. The fuel rail fuel pressure sensor is located at the rear of the left-side fuel rail. Disconnect the fuel pressure sensor electrical connector. Unscrew and remove the sensor from the end of the fuel rail. Clean the threads in the fuel rail of any gasoline. Apply a single drop of oil on the new sensor threads, then install the sensor and hand tighten it. Remove the sensor, apply another drop of clean engine oil on the threads, then reinstall the sensor and tighten it. Connect the sensor electrical connector. The remaining installation steps are the reverse of the removal process. Remove the low-pressure fuel feed line bracket bolt and disconnect the feed line at the pump. Using a flare-nut wrench, unscrew the high-pressure line fittings between the fuel rail and fuel pump and discard the pipe as a new one must be used. Disconnect the electrical connector from the high-pressure fuel pump. Remove the high-pressure fuel pump bolts, then remove the cover, pump, and gasket. Always replace the bolts and pump gasket with new ones. With the pump removed, rotate the engine by hand and ensure that the camshaft lobe is at its base circle (lowest point) before attempting to install the pump. Lubricate the pump roller with engine oil. Using a NEW gasket, position the pump and cover onto the valley cover and tighten the bolts evenly, one turn at a time, from side to side. Tighten the bolts. The remaining installation steps are the reverse of the removal process. Clean the high-pressure fuel line fittings on the pump and crossover pipe, then apply a drop of clean engine oil to the threads of each fitting. Install the NEW high-pressure fuel line, tightening the fittings to the torque specified in the Specifications. The remaining installation steps are the reverse of the removal procedure. Reconnect the cable to the negative battery terminal, then start the engine and check for fuel leaks.
    Posted by GMPartsGiant Specialist
    Q:
    What should I do if I can't hear the fuel pump for the 2014 Cadillac Escalade? Posted by Customer
    A:
    Remove the fuel filler cap and have an assistant turn the ignition switch to ON while you listen for the sound.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump
    Q:
    What is the next step after disconnecting the battery terminal for the 2014 Cadillac Escalade? Posted by Customer
    A:
    Remove the fuel tank.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Fuel Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 13512934, the Right Choice

To ensure reliability, purchase GM part # 13512934 Fuel Tank Fuel Pump Module Kit (W/O Fuel Level Se. It is sometimes referred to as Chevrolet Fuel Pump. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Tahoe models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 13512934 Fuel Tank Fuel Pump Module Kit (W/O Fuel Level Se. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly