Chevrolet 13596945 Fuel Tank Fuel Pump Module Kit (W/O Fuel Level Sensor)

You can Select Your Vehicle to check if 13596945 fits your vehicle.

Remove the fuel tank.

If you can't hear the pump, you can remove the fuel filler cap, depress the spring-loaded door inside the fuel filler neck, and have an assistant turn the ignition switch to ON while you listen for the pump operating for a couple of seconds.

Start by removing the oil filler cap and engine cover fasteners. Lift the engine cover and valve cover insulator off of the valve cover and reinstall the oil filler cap. Relieve the fuel system pressure and disconnect the cable from the negative battery remote terminal. Disconnect the fuel pressure sensor electrical connector and unscrew and remove the sensor from the fuel rail. Clean the threads in the fuel rail and apply a drop of oil on the new sensor threads before installing it. Remove the sensor again, apply another drop of clean engine oil on the threads, and reinstall it. Connect the sensor electrical connector and reverse the removal process.