Chevrolet 19209268 Cylinder Asm,Brake Master

You can Select Your Vehicle to check if 19209268 fits your vehicle.

If installing a new master cylinder, remove the reservoir from the old one and transfer it to the new master cylinder. To install the new master cylinder, bench bleed it first by mounting it in a vise and attaching bleeder tubes to the outlet ports. Fill the reservoir with brake fluid and slowly push the pistons into the master cylinder to expel air. Repeat until no more air bubbles are present. Remove the bleed tubes and install plugs in the open ports. Install the master cylinder over the studs on the power brake booster and tighten the attaching nuts. Thread the brake line fittings into the master cylinder and fully tighten them. Fill the master cylinder reservoir with fluid and bleed the master cylinder and brake system. Test the operation of the brake system before placing the vehicle into normal service.

If installing a new master cylinder, remove the reservoir from the old one and transfer it to the new master cylinder.