Chevrolet 19209234 Cylinder Asm,Brake Master

You can Select Your Vehicle to check if 19209234 fits your vehicle.

To remove the master cylinder, start by removing as much fluid as possible from the reservoir using a syringe or turkey baster. Place rags under the fluid fittings and prepare caps or plastic bags to cover the ends of the lines once they are disconnected. Loosen the fittings at the ends of the brake lines and plug the ends to prevent contamination. Disconnect the electrical connector at the brake fluid level switch, if equipped, and remove the nuts attaching the master cylinder to the power booster. Carefully pull the master cylinder off the studs and out of the engine compartment.

Disconnect the cable from the negative battery terminal and unplug the electrical connector for the fluid level warning switch.

Loosen the fittings at the ends of the brake lines where they enter the master cylinder and pull the brake lines away from the master cylinder, plugging the ends to prevent contamination.

To remove the master cylinder, start by removing as much fluid as possible from the reservoir using a syringe or turkey baster. Place rags under the fluid fittings and prepare caps or plastic bags to cover the ends of the lines once they are disconnected.