Chevrolet 13508023 Filter, Pass Compartment Air

You can Select Your Vehicle to check if 13508023 fits your vehicle.

These models are equipped with the air filtering element of the cabin air filter, with the access panel arranged behind the glovebox. To take the filter the stops have to be released and the glove box door has to be lowered, after that the tabs on the filter cover have to be released and lowering the filter cover for use. Then pull the filter straight out and scrape out any leaves or any other debris that may be trapped in the housing. The installation is the same as the process of removal, however when the new filter is being installed, make sure that the arrow indicating the AIR FLOW is pointing downwards.

Open the glove box door. For 2015 and earlier models, disconnect the door dampener string and slide a pen or pencil through the loop to prevent the string from retracting into the door. For 2016 and later models, pull the dampener arm towards the front of the door and unhook it from the door by pulling the dampener arm towards the large end of the slot and then pulling the tab out of the slot. Squeeze both sides of the glove box door until the stops clear the sides of the opening and lower the door. Release the Cabin Air Filter door clips and remove the door. Pull the Cabin Air Filter out of the housing. Slide the Cabin Air Filter back into the housing, ensuring the airflow arrows on the filter are pointing downward, then close the door and reinstall the fasteners. The remainder of installation follows the reverse order of removal.

The glovebox should be removed. Press the lock tabs together to unlock the cabin air filter access door, then swing it downwards. The cabin air filter is pulled out of its casing. Insert a new cabin air filter inside the casing, shut the access door and click it back into place. Re-install glove box.

Remove the passenger's side cowl panel grille.