Chevrolet 25814570 Front Bumper Cover *Service Primer

You can Select Your Vehicle to check if 25814570 fits your vehicle.

Bumpers on trucks are usually chrome-plated steel with black or color-matched plastic grilles, but flexible plastic covers reinforced by metal framework can be seen on SUVs. To remove the front bumper, it is necessary to jack it up and unplug electrical connectors of fog lights, then remove fasteners for radiator grille and fender liner before removing the bumper along with an assistant holding it. For rear bumpers, lift them using a jack or stand, unplug plugs for license plate lamps and other components from which bolts, nuts as well as stud plates need to be removed that hold this part to the frame. For SUV models' front bumper cover removal: headlights housings out, fender liner fasteners out; electrical connectors at the fog lights undone; top of each fender well unclip together inside at the bottom of each side; fasteners above grill that attaches cover on top of radiator support undone. The rear bumper cover should have its rear fender liners removed, lower screws at their bottoms off; top ones as well as those placed inside both sides detached; fasteners from atop undone including electrical connectors for back parking sensors being taken apart. In order to install any bumpers follow these steps in reverse.

SUV bumpers have flexible plastic covers reinforced by metal framework.

To remove the rear bumper of a truck, you need to support it with a jack or jack stand, disconnect electrical connectors for license plate lights and other components, and remove bolts, nuts, and stud plates retaining the bumper to the frame.