Chevrolet 89045306 Console Asm,Front Floor *Pewter

You can Select Your Vehicle to check if 89045306 fits your vehicle.

First of all, it is important to lock the wheels not to roll the car, as during work, it is necessary to turn off the gear in Park and provide the release of the handbrake handle. Turn and unlock the setscrew on the end of the shift knob then pinch the shift lever boot sleeves to release the clips to pull out the knob as well as the boot. For models to Oldsmobile, the shift handle release button should be pressed as the shift lever is moved to the rear After doing this, the console trim place has the screws and clips removed. Lift up the console lid and thereafter locate the six screws which hold the storage bin and then pull it off. Next, unscrew the console mounting screw and park the parking brake lever fully pull up. There are two trim pieces, one running along the console to the instrument panel, remove the two front attachments. Then, raise the front part of the console; turn it up and backward to expose the electrical connectors behind - remove them; pull down the parking brake lever to the middle and finally, pull out the console from the car. Overhead console can be taken down as follows: remove the two screws at the rear that are for the front console, then pull the front section down engaging two tabs at the front, disconnect the electrical connectors at the back, and lift up to take out the overhead console. In the case of the rear overhead console, they are four screws that hold it; after which you lower the console and take it out. Installation is done in the reverse order to removal.