Make sure this part fits

Chevrolet 98077453 Camshaft

2001-2015 Chevrolet

Customer Questions & Expert Answers (5)
GM 98077453 Camshaft
  • Part Description
    CAMSHAFT, Engine
  • Replaces
    97211770
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
$476.38 MSRP: $756.33
You Save: $279.95 (38%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn’t currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number98077453
    Part DescriptionCAMSHAFT, Engine
    Item Dimensions22.9 x 2.5 x 2.5 inches
    Item Weight13.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces97211770
    ManufacturerGeneral Motors
    SKU98077453
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2015, 2006-2010 Chevrolet Express8 Cyl 6.6L Diesel1 TON CARGO EXPRESS, 1 TON CARGO SAVANA, 1 TON COMMERCIAL/RV CUTAWAY, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON CARGO SAVANA, 3/4 TON PASSENGER EXPRESS, 3/4 TON PASSENGER SAVANA
    2001-2010 Chevrolet Silverado8 Cyl 6.6L Diesel2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 3/4 TON, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CAB CHASSIS 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5
    2001-2005 Chevrolet Suburban2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3/4 TON, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS EXTENDED CAB 185.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, EXT 3/4 TON, XL 3/4 TON
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 98077453 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove the camshaft and Lash Adjuster on 4.3L V6 engine for Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL? Posted by Customer
    A:
    Begin with taking off the camshaft by unscrewing or unbolting the rocker arms, push rods, intake manifolds, timing chains, cam sprocket and balance shaft drive gear; in addition, you may have to do away with such things as fan radiator and condenser. Place the lash adjusters in a labeled box and disconnect the lash adjuster retainer. A special tool can be employed together with magnet or even your fingers to extract the lash adjusters from their bores. Remove the camshaft retainer plate and use three 6-inch long, 5/16-18 bolts as a handle to remove the camshaft from block. When inspecting clean lash adjuster & cam shaft using solvent checking for wear on both of them. The journals as well as cam lobes should be checked for wear. Measure. If its damaged then it must be replaced along with bearings. To lubricate bearing journals and cam lobes with assembly lube, the camshaft will finally slide into engine during installation. Fix other parts like this: install that thrust plate for a Cam Shaft; balance shaft drive gear plus also timing chain & sprockets. Lubricate lash adjusters using clean engine oil then fix them within block. The rest of installation is opposite to that of removing these components. Cooling system should be refilled at last because we are starting again after changing an engine oil filter. Finally start engine (run) and check there are no leaks.
    Posted by GMPartsGiant Specialist
    Q:
    What are the steps for installing the camshaft for the 2011 GMC Sierra? Posted by Customer
    A:
    The steps for installing the camshaft are as follows:1. Lubricate the camshaft bearing journals and cam lobes with assembly lube.2. Slide the camshaft into the engine.3. Install the camshaft thrust plate.4. Install the balance shaft drive gear.5. Install the timing chain and sprockets.6. Lubricate the lifters with clean engine oil.7. Install the lifters in the block.8. Complete the installation in reverse order of removal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What are the initial steps to remove the camshaft for the 2012 GMC Sierra? Posted by Customer
    A:
    The initial steps to remove the camshaft are disconnecting the cable from the negative battery terminal and relieving the fuel system pressure.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What are the initial steps to remove the camshaft for the 2012 Chevrolet Silverado? Posted by Customer
    A:
    The initial steps to remove the camshaft are disconnecting the cable from the negative battery terminal and relieving the fuel system pressure.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 98077453, the Right Choice

To ensure reliability, purchase GM part # 98077453 Camshaft. It is sometimes referred to as Chevrolet Camshaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Express, Silverado, Suburban models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 98077453 Camshaft. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly