Chevrolet 15052598 Cable Assembly, Parking Brake Rear

You can Select Your Vehicle to check if 15052598 fits your vehicle.

To remove the left rear cable, loosen the cable adjusting nut if necessary and disengage the front end of the cable from the connector. Squeeze the fingers on the cable ferrule at the forward end of the equalizer and slide the cable out.

To release the parking brake, start by loosening the rear wheel lugnuts if you're removing a rear cable. Then, raise the vehicle and secure it on jack stands before removing the wheel. For the front cable, you may need to back off the adjusting nut to release tension. Detach the parking brake pedal assembly from the kick panel and pull the plug on the end of the cable out of its hole in the ratcheting cam. Squeeze the tangs on the parking brake cable ferrule and slip the cable through its bracket. Underneath the vehicle, disengage the front cable from the connector located forward of the equalizer. The installation is the reverse of removal, and don't forget to adjust the cable when you're done.