Chevrolet 92228290 Boot Kit, Rear Wheel Drive Shaft Outer Cv Joint

You can Select Your Vehicle to check if 92228290 fits your vehicle.

To remove the outer CV boot, start by removing the CV boot and mounting it in a vise lined with wood or rags to prevent damage. Cut off the boot clamps and pull the boot off the CV joint. Use a hammer and brass punch to drive the CV joint off the shaft. Then, use snap-ring pliers to spread open the retaining ring and remove it from the shaft. Slide the CV boot off the axleshaft. Next, for joint disassembly, inspection, and reassembly, use diagonal cutters to cut off the boot clamps. Knock the inner race down to remove a ball bearing, and pry the balls out of the cage one at a time. Tilt the inner race and cage 90 degrees, align the windows in the cage with the lands of the housing, and rotate the inner race and cage out of the housing. Clean the components with solvent and check for any damage or wear.