Make sure this part fits

Chevrolet 19332965 Bar,Front Torsion

2004-2012 Chevrolet Colorado

Customer Questions & Expert Answers (3)
GM 19332965 Bar,Front Torsion
  • Part Description
    BAR,FRT TORS
  • Position
    Front
  • Replaces
    20784586, 15167959
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number19332965
    Part DescriptionBAR,FRT TORS
    Other NamesTorsion Bar
    Item Dimensions48.2 x 1.7 x 1.7 inches
    Item Weight14.10 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces20784586, 15167959
    ManufacturerGeneral Motors
    SKU19332965
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2004-2012 Chevrolet Colorado4 Cyl 2.8L, 4 Cyl 2.9L, 5 Cyl 3.5L, 5 Cyl 3.7LCREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 19332965 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    Why must torsion bars be replaced as a pair and what precautions should be taken during the replacement process on Chevrolet Colorado? Posted by Customer
    A:
    Torsion bars must be replaced as a pair and are specific to the left or right side. When working around them, take care not to chip the exterior coating to prevent rust damage. Begin by raising the front of the vehicle and securely supporting it on jackstands, while blocking the rear wheels to allow the front wheels to hang down fully. Work on one side at a time, marking the relationship of the adjuster arm to the rear end of the bar and counting the number of exposed threads on the adjuster bolt. Remove the adjuster bolt, spacer, and nut, then move the torsion bar rearward with the adjustment arm still in position until the front end clears the lower control arm anchor, allowing for removal of the torsion bar and arm. For installation, slide the adjustment arm onto the torsion bar, aligning the splines using the previously made marks. Slip the front end of the bar into the splined anchor in the lower control arm and reinstall the adjuster bolt, spacer, and nut. Tighten the adjuster nut the same number of turns recorded before disassembly. After driving the vehicle to allow the suspension to settle, compare the left and right side ride heights and adjust the torsion bars as necessary by turning the adjuster nuts gradually in the desired direction, rolling the vehicle back and forth a few feet between adjustments, and ensuring that the final adjustment is made as the adjuster nut is lightened, not loosened.
    Posted by GMPartsGiant Specialist
    Q:
    Why must torsion bars be replaced as a pair and what precautions should be taken during the replacement process on GMC Canyon? Posted by Customer
    A:
    Torsion bars must be replaced as a pair and are specific to the left or right side. When working around them, take care not to chip the exterior coating to prevent rust damage. Begin by raising the front of the vehicle and securely supporting it on jackstands, while blocking the rear wheels to allow the front wheels to hang down fully. Work on one side at a time, marking the relationship of the adjuster arm to the rear end of the bar and counting the number of exposed threads on the adjuster bolt. Remove the adjuster bolt, spacer, and nut, then move the torsion bar rearward with the adjustment arm still in position until the front end clears the lower control arm anchor, allowing for removal of the torsion bar and arm. For installation, slide the adjustment arm onto the torsion bar, aligning the splines using the previously made marks. Slip the front end of the bar into the splined anchor in the lower control arm and reinstall the adjuster bolt, spacer, and nut. Tighten the adjuster nut the same number of turns recorded before disassembly. After driving the vehicle to allow the suspension to settle, compare the left and right side ride heights and adjust the torsion bars as necessary by turning the adjuster nuts gradually in the desired direction, rolling the vehicle back and forth a few feet between adjustments, and ensuring that the final adjustment is made as the adjuster nut is lightened, not loosened.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19332965, the Right Choice

To ensure reliability, purchase GM part # 19332965 Bar,Front Torsion. It is sometimes referred to as Chevrolet Torsion Bar. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Colorado models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 19332965 Bar,Front Torsion. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly