Make sure this part fits

Chevrolet 25871229 Rear Shock Absorber Assembly

2007-2010 Chevrolet

Customer Questions & Expert Answers (13)
GM 25871229 Rear Shock Absorber Assembly
  • Part Description
    Absorber Assembly, Rear Shock ; Absorber, Front And Rear Suspension
  • Position
    Rear
  • Replaces
    15935559, 25871230, 15797190, 15797191
  • Manufacturer
    General Motors
Make sure this part fits
$52.66 MSRP: $160.77
You Save: $108.11 (68%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number25871229
    Part DescriptionAbsorber Assembly, Rear Shock ; Absorber, Front And Rear Suspension
    Other NamesShock, Shock Absorber
    Item Dimensions27.3 x 4.5 x 3.5 inches
    Item Weight5.60 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15935559, 25871230, 15797190, 15797191
    Require Quantity2
    ManufacturerGeneral Motors
    SKU25871229
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2010 Chevrolet Avalanche8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L1/2 TON
    2007 Chevrolet Suburban8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L1/2 TON
    2007-2009 Chevrolet Tahoe8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L4 DOOR 1/2 TON
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 25871229 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove a rear shock absorber from Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL? Posted by Customer
    A:
    To remove the shock absorber, raise the rear of the vehicle and support it securely on jackstands. Disconnect the electrical connector and the airline from the shock absorber. Support the rear axle with a floor jack. Remove the shock absorber fasteners and then remove it. Installation is the reverse of removal.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done if fluid leakage is observed for the 2011 Chevrolet Avalanche? Posted by Customer
    A:
    If leakage is noted, it's advisable to replace the shocks as a set.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the 2010 Chevrolet Avalanche? Posted by Customer
    A:
    To install, reverse the removal steps and tighten the mounting fasteners to the torque specifications. If equipped with a suspension control system, reconnect the electrical connector to the top of the shock absorber.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the rear axle be supported during the removal process for the 2012 Chevrolet Avalanche? Posted by Customer
    A:
    The rear axle should be supported with a floor jack placed under the axle tube closest to the shock absorber being removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the 2010 Chevrolet Suburban? Posted by Customer
    A:
    To install, reverse the removal steps and tighten the mounting fasteners to the torque specifications. If equipped with a suspension control system, reconnect the electrical connector to the top of the shock absorber.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done to prevent the 2009 Chevrolet Tahoe from rolling off the stands? Posted by Customer
    A:
    The front wheels should be blocked to prevent the vehicle from rolling off the stands.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done if fluid leakage is observed for the 2007 Chevrolet Suburban? Posted by Customer
    A:
    If leakage is noted, it's advisable to replace the shocks as a set.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the 2011 Chevrolet Tahoe? Posted by Customer
    A:
    Follow the same steps as removing the coil-over shock absorber model, but use a backup wrench on the stem to remove the upper mounting nut and related hardware. Remove the lower mounting nut and bolt, noting the direction in which the bolt points.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done if there is evidence of cracks or leaking lubricant in the CV boots for the 2013 Chevrolet Tahoe? Posted by Customer
    A:
    If there is any evidence of cracks or leaking lubricant in the CV boots, they must be replaced.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after supporting the rear axle for the 2012 Chevrolet Suburban? Posted by Customer
    A:
    After supporting the rear axle, the shock absorber upper and lower mounting fasteners should be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can you check for play in the steering system components for the 2012 GMC Yukon? Posted by Customer
    A:
    Grasp each front tire at the front and rear edges, push in at the front, pull out at the rear, and feel for play in the steering system components. If any free play is noted, check the idler arm and the tie-rod ends for looseness.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the 2011 GMC Yukon? Posted by Customer
    A:
    To install, reverse the removal steps and ensure the lower mounting bolt is pointing in the same direction as before.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 25871229, the Right Choice

To ensure reliability, purchase GM part # 25871229 Rear Shock Absorber Assembly. It is sometimes referred to as Chevrolet Shock Absorber. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Avalanche, Suburban, Tahoe models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 25871229 Rear Shock Absorber Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly